|
181
|
exUndo, An Undo operation is performed (CTR + Z), exRedo, A Redo operation is performed (CTR + Y). exUndoRedoUpdate, The Undo/Redo queue is updated
// LayoutEndChanging event - Notifies your application once the control's layout has been changed.
void onEvent_LayoutEndChanging(int _Operation)
{
;
print( "LayoutEndChanging" );
print( exsurface1.FormatABC("value case (default:value;32:`exUndoRedoUpdate`;33:`exUndo`;34:`exRedo`)",_Operation) );
}
// LayoutStartChanging event - Occurs when the control's layout is about to be changed.
void onEvent_LayoutStartChanging(int _Operation)
{
;
print( "LayoutStartChanging" );
print( exsurface1.FormatABC("value case (default:value;32:`exUndoRedoUpdate`;33:`exUndo`;34:`exRedo`)",_Operation) );
}
public void init()
{
COM com_Elements;
anytype var_Elements;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowUndoRedo(true);
exsurface1.AllowLinkControlPoint(99/*exAllowChangeTo | exAllowChangeFrom | exEndControlPoint | exStartControlPoint*/);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Node <b>1",COMVariant::createFromInt(-64),COMVariant::createFromInt(-64));
com_Elements.Add("Node <b>2");
com_Elements.Add("Node <b>3",COMVariant::createFromInt(64),COMVariant::createFromInt(-64));
exsurface1.Links().Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)),"L1");
exsurface1.EndUpdate();
print( "Press CTRL+Z to Undo, CTRL+Y to Redo" );
}
|
|
180
|
exLinkObjects, the user creates an element on the surface. The AllowLinkObjects property specifies the keys combination to allow user to link elements on the surface
// LayoutEndChanging event - Notifies your application once the control's layout has been changed.
void onEvent_LayoutEndChanging(int _Operation)
{
;
print( "LayoutEndChanging" );
print( exsurface1.FormatABC("value = 9 ? `exLinkObjects` : value",_Operation) );
}
// LayoutStartChanging event - Occurs when the control's layout is about to be changed.
void onEvent_LayoutStartChanging(int _Operation)
{
;
print( "LayoutStartChanging" );
print( exsurface1.FormatABC("value = 9 ? `exLinkObjects` : value",_Operation) );
}
public void init()
{
COM com_Elements;
anytype var_Elements;
;
super();
exsurface1.BeginUpdate();
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Node <b>1",COMVariant::createFromInt(-64),COMVariant::createFromInt(-64));
com_Elements.Add("Node <b>2");
com_Elements.Add("Node <b>3",COMVariant::createFromInt(64),COMVariant::createFromInt(-64));
exsurface1.EndUpdate();
print( "Hold SHIFT, click an element, and drag to another element to create a link between them" );
}
|
|
179
|
exEditObject, the user edits the element's caption
// Click event - Occurs when the user presses and then releases the left mouse button over the control.
void onEvent_Click()
{
// ElementFromPoint(-1,-1).Edit(0)
;
}
// LayoutEndChanging event - Notifies your application once the control's layout has been changed.
void onEvent_LayoutEndChanging(int _Operation)
{
;
print( "LayoutEndChanging" );
print( exsurface1.FormatABC("value = 8 ? `exEditObject` : value",_Operation) );
}
// LayoutStartChanging event - Occurs when the control's layout is about to be changed.
void onEvent_LayoutStartChanging(int _Operation)
{
;
print( "LayoutStartChanging" );
print( exsurface1.FormatABC("value = 8 ? `exEditObject` : value",_Operation) );
}
public void init()
{
COM com_Elements;
anytype var_Elements;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowLinkControlPoint(99/*exAllowChangeTo | exAllowChangeFrom | exEndControlPoint | exStartControlPoint*/);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Node <b>1",COMVariant::createFromInt(-64),COMVariant::createFromInt(-64));
com_Elements.Add("Node <b>2");
com_Elements.Add("Node <b>3",COMVariant::createFromInt(64),COMVariant::createFromInt(-64));
exsurface1.Links().Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)),"L1");
exsurface1.EndUpdate();
print( "Click an element to edit its caption" );
}
|
|
178
|
exCreateObject, the user creates an element on the surface. The AllowCreateObject property specifies the keys combination to allow user to create elements on the surface
// LayoutEndChanging event - Notifies your application once the control's layout has been changed.
void onEvent_LayoutEndChanging(int _Operation)
{
;
print( "LayoutEndChanging" );
print( exsurface1.FormatABC("value = 7 ? `exCreateObject` : value",_Operation) );
}
// LayoutStartChanging event - Occurs when the control's layout is about to be changed.
void onEvent_LayoutStartChanging(int _Operation)
{
;
print( "LayoutStartChanging" );
print( exsurface1.FormatABC("value = 7 ? `exCreateObject` : value",_Operation) );
}
public void init()
{
COM com_Element,com_Elements;
anytype var_Element,var_Elements;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowLinkControlPoint(99/*exAllowChangeTo | exAllowChangeFrom | exEndControlPoint | exStartControlPoint*/);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Node <b>1",COMVariant::createFromInt(-64),COMVariant::createFromInt(-64));
var_Element = COM::createFromObject(com_Elements.Add("Node <b>2")); com_Element = var_Element;
com_Element.Selected(true);
com_Elements.Add("Node <b>3",COMVariant::createFromInt(64),COMVariant::createFromInt(-64));
exsurface1.Links().Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)),"L1");
exsurface1.EndUpdate();
print( "Double-click on the surface and immediately drag to a new position to create an element" );
}
|
|
177
|
exSelectNothing, the user clicks an empty zone of the surface. The AllowSelectNothing property specifies the keys combination to allow user to select nothing on the surface
// LayoutEndChanging event - Notifies your application once the control's layout has been changed.
void onEvent_LayoutEndChanging(int _Operation)
{
;
print( "LayoutEndChanging" );
print( exsurface1.FormatABC("value = 6 ? `exSelectNothing` : value",_Operation) );
}
// LayoutStartChanging event - Occurs when the control's layout is about to be changed.
void onEvent_LayoutStartChanging(int _Operation)
{
;
print( "LayoutStartChanging" );
print( exsurface1.FormatABC("value = 6 ? `exSelectNothing` : value",_Operation) );
}
public void init()
{
COM com_Element,com_Elements;
anytype var_Element,var_Elements;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowSelectNothing(true);
exsurface1.AllowLinkControlPoint(99/*exAllowChangeTo | exAllowChangeFrom | exEndControlPoint | exStartControlPoint*/);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Node <b>1",COMVariant::createFromInt(-64),COMVariant::createFromInt(-64));
var_Element = COM::createFromObject(com_Elements.Add("Node <b>2")); com_Element = var_Element;
com_Element.Selected(true);
com_Elements.Add("Node <b>3",COMVariant::createFromInt(64),COMVariant::createFromInt(-64));
exsurface1.Links().Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)),"L1");
exsurface1.EndUpdate();
print( "Select an element, and then click outside to select nothing" );
}
|
|
176
|
exSelectObject, the user clicks the object to get it selected. The AllowSelectObject property specifies the keys combination to allow user to select the object
// LayoutEndChanging event - Notifies your application once the control's layout has been changed.
void onEvent_LayoutEndChanging(int _Operation)
{
;
print( "LayoutEndChanging" );
print( exsurface1.FormatABC("value = 5 ? `exSelectObject` : value",_Operation) );
}
// LayoutStartChanging event - Occurs when the control's layout is about to be changed.
void onEvent_LayoutStartChanging(int _Operation)
{
;
print( "LayoutStartChanging" );
print( exsurface1.FormatABC("value = 5 ? `exSelectObject` : value",_Operation) );
}
public void init()
{
COM com_Elements;
anytype var_Elements;
str var_s;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowLinkControlPoint(99/*exAllowChangeTo | exAllowChangeFrom | exEndControlPoint | exStartControlPoint*/);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Node <b>1",COMVariant::createFromInt(-64),COMVariant::createFromInt(-64));
com_Elements.Add("Node <b>2");
com_Elements.Add("Node <b>3",COMVariant::createFromInt(64),COMVariant::createFromInt(-64));
exsurface1.Links().Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)),"L1");
exsurface1.EndUpdate();
var_s = "Hold ALT and click, then drag to select elements within the drawn rectangle. Click an element to select it. CTRL + CLick to unse";
var_s = var_s + "lect it";
print( var_s );
}
|
|
175
|
exMoveObject, the user moves the object. The AllowMoveObject property specifies the keys combination to allow user to move the object
// LayoutEndChanging event - Notifies your application once the control's layout has been changed.
void onEvent_LayoutEndChanging(int _Operation)
{
;
print( "LayoutEndChanging" );
print( exsurface1.FormatABC("value = 4 ? `exMoveObject` : value",_Operation) );
}
// LayoutStartChanging event - Occurs when the control's layout is about to be changed.
void onEvent_LayoutStartChanging(int _Operation)
{
;
print( "LayoutStartChanging" );
print( exsurface1.FormatABC("value = 4 ? `exMoveObject` : value",_Operation) );
}
public void init()
{
COM com_Elements;
anytype var_Elements;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowLinkControlPoint(99/*exAllowChangeTo | exAllowChangeFrom | exEndControlPoint | exStartControlPoint*/);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Node <b>1",COMVariant::createFromInt(-64),COMVariant::createFromInt(-64));
com_Elements.Add("Node <b>2");
com_Elements.Add("Node <b>3",COMVariant::createFromInt(64),COMVariant::createFromInt(-64));
exsurface1.Links().Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)),"L1");
exsurface1.EndUpdate();
print( "Move an element" );
}
|
|
174
|
exResizeObject, the user resizes the object. The AllowResizeObject property specifies the keys combination to allow user to resize the object
// LayoutEndChanging event - Notifies your application once the control's layout has been changed.
void onEvent_LayoutEndChanging(int _Operation)
{
;
print( "LayoutEndChanging" );
print( exsurface1.FormatABC("value = 3 ? `exResizeObject` : value",_Operation) );
}
// LayoutStartChanging event - Occurs when the control's layout is about to be changed.
void onEvent_LayoutStartChanging(int _Operation)
{
;
print( "LayoutStartChanging" );
print( exsurface1.FormatABC("value = 3 ? `exResizeObject` : value",_Operation) );
}
public void init()
{
COM com_Element,com_Elements;
anytype var_Element,var_Elements;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowLinkControlPoint(99/*exAllowChangeTo | exAllowChangeFrom | exEndControlPoint | exStartControlPoint*/);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
var_Element = COM::createFromObject(com_Elements.Add("Node <b>1",COMVariant::createFromInt(-64),COMVariant::createFromInt(-64))); com_Element = var_Element;
com_Element.AutoSize(false);
var_Element = COM::createFromObject(com_Elements.Add("Node <b>2")); com_Element = var_Element;
com_Element.AutoSize(false);
var_Element = COM::createFromObject(com_Elements.Add("Node <b>3",COMVariant::createFromInt(64),COMVariant::createFromInt(-64))); com_Element = var_Element;
com_Element.AutoSize(false);
exsurface1.Links().Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)),"L1");
exsurface1.EndUpdate();
print( "Resize an element" );
}
|
|
173
|
exSurfaceHome, the user clicks the Home button on the control's toolbar, so the surface is restored to original position. The Home method has the same effect
// LayoutEndChanging event - Notifies your application once the control's layout has been changed.
void onEvent_LayoutEndChanging(int _Operation)
{
;
print( "LayoutEndChanging" );
print( exsurface1.FormatABC("value = 2 ? `exSurfaceHome` : value",_Operation) );
}
// LayoutStartChanging event - Occurs when the control's layout is about to be changed.
void onEvent_LayoutStartChanging(int _Operation)
{
;
print( "LayoutStartChanging" );
print( exsurface1.FormatABC("value = 2 ? `exSurfaceHome` : value",_Operation) );
}
public void init()
{
COM com_Elements;
anytype var_Elements;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowLinkControlPoint(99/*exAllowChangeTo | exAllowChangeFrom | exEndControlPoint | exStartControlPoint*/);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Node <b>1",COMVariant::createFromInt(-64),COMVariant::createFromInt(-64));
com_Elements.Add("Node <b>2");
com_Elements.Add("Node <b>3",COMVariant::createFromInt(64),COMVariant::createFromInt(-64));
exsurface1.Links().Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)),"L1");
exsurface1.EndUpdate();
print( "Click the Home button" );
}
|
|
172
|
exSurfaceZoom, the user magnifies or shrinks the surface. The AllowZoomSurface property specifies the keys combination to allow user to zoom the surface
// LayoutEndChanging event - Notifies your application once the control's layout has been changed.
void onEvent_LayoutEndChanging(int _Operation)
{
;
print( "LayoutEndChanging" );
print( exsurface1.FormatABC("value = 1 ? `exSurfaceZoom` : value",_Operation) );
}
// LayoutStartChanging event - Occurs when the control's layout is about to be changed.
void onEvent_LayoutStartChanging(int _Operation)
{
;
print( "LayoutStartChanging" );
print( exsurface1.FormatABC("value = 1 ? `exSurfaceZoom` : value",_Operation) );
}
public void init()
{
COM com_Elements;
anytype var_Elements;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowLinkControlPoint(99/*exAllowChangeTo | exAllowChangeFrom | exEndControlPoint | exStartControlPoint*/);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Node <b>1",COMVariant::createFromInt(-64),COMVariant::createFromInt(-64));
com_Elements.Add("Node <b>2");
com_Elements.Add("Node <b>3",COMVariant::createFromInt(64),COMVariant::createFromInt(-64));
exsurface1.Links().Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)),"L1");
exsurface1.EndUpdate();
print( "Click and drag the surface to reposition it" );
}
|
|
171
|
exSurfaceMove, the user scrolls or moves the surface. The AllowMoveSurface property specifies the keys combination to allow user to move / scroll the surface
// LayoutEndChanging event - Notifies your application once the control's layout has been changed.
void onEvent_LayoutEndChanging(int _Operation)
{
;
print( "LayoutEndChanging" );
print( exsurface1.FormatABC("value = 0 ? `exSurfaceMove` : value",_Operation) );
}
// LayoutStartChanging event - Occurs when the control's layout is about to be changed.
void onEvent_LayoutStartChanging(int _Operation)
{
;
print( "LayoutStartChanging" );
print( exsurface1.FormatABC("value = 0 ? `exSurfaceMove` : value",_Operation) );
}
public void init()
{
COM com_Elements;
anytype var_Elements;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowLinkControlPoint(99/*exAllowChangeTo | exAllowChangeFrom | exEndControlPoint | exStartControlPoint*/);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Node <b>1",COMVariant::createFromInt(-64),COMVariant::createFromInt(-64));
com_Elements.Add("Node <b>2");
com_Elements.Add("Node <b>3",COMVariant::createFromInt(64),COMVariant::createFromInt(-64));
exsurface1.Links().Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)),"L1");
exsurface1.EndUpdate();
print( "Click and drag the surface to reposition it" );
}
|
|
170
|
FormatABC method formats the A,B,C values based on the giving expression and returns the result
public void init()
{
;
super();
print( exsurface1.FormatABC("value format ``",COMVariant::createFromInt(1000)) );
}
|
|
169
|
FreezeEvents(Freeze) method prevents firing any event. For instance, FreezeEvents(True) freezes the control's events, no no event is fired, until the FreezeEvents(False) is called
// Event event - Notifies the application once the control fires an event.
void onEvent_Event(int _EventID)
{
;
print( exsurface1.EventParam(-2) );
}
public void init()
{
COM com_Elements;
anytype var_Elements;
;
super();
exsurface1.FreezeEvents(true);
print( "No event is fired after FreezeEvents(True) call" );
exsurface1.BeginUpdate();
exsurface1.AllowLinkControlPoint(3/*exEndControlPoint | exStartControlPoint*/);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Node <b>1",COMVariant::createFromInt(-64),COMVariant::createFromInt(-64));
com_Elements.Add("Node <b>2");
exsurface1.Links().Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)),"L1");
exsurface1.EndUpdate();
}
|
|
168
|
The exAllowChangeFrom(0x20)/exAllowChangeTo(0x40) flag of LinkControlPointEnum type allows the user to adjust the link's from/to element by dragging and dropping the start control point (requires the exStartControlPoint/exEndControlPoint flag)
// LayoutEndChanging event - Notifies your application once the control's layout has been changed.
void onEvent_LayoutEndChanging(int _Operation)
{
;
print( "LayoutEndChanging" );
print( _Operation );
print( exsurface1.FocusLink().ID() );
}
// LayoutStartChanging event - Occurs when the control's layout is about to be changed.
void onEvent_LayoutStartChanging(int _Operation)
{
;
print( "LayoutStartChanging" );
print( _Operation );
print( exsurface1.FocusLink().ID() );
}
public void init()
{
COM com_Elements;
anytype var_Elements;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowLinkControlPoint(99/*exAllowChangeTo | exAllowChangeFrom | exEndControlPoint | exStartControlPoint*/);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Node <b>1",COMVariant::createFromInt(-64),COMVariant::createFromInt(-64));
com_Elements.Add("Node <b>2");
com_Elements.Add("Node <b>3",COMVariant::createFromInt(64),COMVariant::createFromInt(-64));
exsurface1.Links().Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)),"L1");
exsurface1.FocusLink("L1");
exsurface1.EndUpdate();
}
|
|
167
|
The LayoutStartChanging(exFocusLink)/LayoutEndChanging(exFocusLink) event notifies your application when the user focuses on a new link
// LayoutEndChanging event - Notifies your application once the control's layout has been changed.
void onEvent_LayoutEndChanging(int _Operation)
{
;
print( "LayoutEndChanging" );
print( _Operation );
print( exsurface1.FocusLink() );
}
// LayoutStartChanging event - Occurs when the control's layout is about to be changed.
void onEvent_LayoutStartChanging(int _Operation)
{
;
print( "LayoutStartChanging" );
print( _Operation );
print( exsurface1.FocusLink() );
}
public void init()
{
COM com_Elements;
anytype var_Elements;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowLinkControlPoint(3/*exEndControlPoint | exStartControlPoint*/);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Node <b>1",COMVariant::createFromInt(-64),COMVariant::createFromInt(-64));
com_Elements.Add("Node <b>2");
exsurface1.Links().Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)),"L1");
exsurface1.EndUpdate();
}
|
|
166
|
Focus a link
// LayoutEndChanging event - Notifies your application once the control's layout has been changed.
void onEvent_LayoutEndChanging(int _Operation)
{
;
print( "LayoutEndChanging" );
print( _Operation );
}
// LayoutStartChanging event - Occurs when the control's layout is about to be changed.
void onEvent_LayoutStartChanging(int _Operation)
{
;
print( "LayoutStartChanging" );
print( _Operation );
}
public void init()
{
COM com_Elements;
anytype var_Elements;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowLinkControlPoint(3/*exEndControlPoint | exStartControlPoint*/);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Node <b>1",COMVariant::createFromInt(-64),COMVariant::createFromInt(-64));
com_Elements.Add("Node <b>2");
exsurface1.Links().Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)),"L1");
exsurface1.FocusLink("L1");
exsurface1.EndUpdate();
}
|
|
165
|
The caption is displayed on the back, so the picture overrides it. How can I place the caption on the foreground
public void init()
{
COM com_Element;
anytype var_Element;
;
super();
exsurface1.BeginUpdate();
exsurface1.DrawPartsOrder("extracaption,extrapicture,picture,check,caption,client");
exsurface1.HTMLPicture("pic1","c:\\exontrol\\images\\sun.png");
var_Element = COM::createFromObject(exsurface1.Elements()).Add("<b>Element"); com_Element = var_Element;
com_Element.PicturesAlign(17/*exMiddleCenter*/);
com_Element.CaptionAlign(17/*exMiddleCenter*/);
com_Element.Pictures("pic1");
exsurface1.EndUpdate();
}
|
|
164
|
Draws a frame arround the link's arrow
public void init()
{
COM com_Elements,com_Link,com_Links;
anytype var_Elements,var_Link,var_Links;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowLinkControlPoint(-1/*0xffffffff | exAllowChangeTo | exAllowChangeFrom | exOrthoArrange | exMiddleControlPoint | exControlPoint | exEndControlPoint | exStartControlPoint*/);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Element <sha ;;0>A");
com_Elements.Add("Element <sha ;;0>B",COMVariant::createFromInt(164),COMVariant::createFromInt(64));
com_Elements.Add("Element <sha ;;0>B",COMVariant::createFromInt(0),COMVariant::createFromInt(132));
var_Links = exsurface1.Links(); com_Links = var_Links;
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2))).CustomPath("0.5,0.25,0.5,.75");
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(3)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2))).CustomPath("0.5,0.25,0.5,.75");
var_Link = com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(3)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1))); com_Link = var_Link;
com_Link.ShowLinkType(3/*exLinkStraight | exLinkDirect*/);
com_Link.StartPos(0/*LeftAlignment*/);
com_Link.ArrowSize(8);
com_Link.ArrowColor(WinApi::RGB2int(255,255,255));
com_Link.ArrowFrameColor(WinApi::RGB2int(0,0,0));
exsurface1.FitToClient();
exsurface1.EndUpdate();
}
|
|
163
|
Draws a frame arround the arrow for all links
public void init()
{
COM com_Elements,com_Link,com_Links;
anytype var_Elements,var_Link,var_Links;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowLinkControlPoint(-1/*0xffffffff | exAllowChangeTo | exAllowChangeFrom | exOrthoArrange | exMiddleControlPoint | exControlPoint | exEndControlPoint | exStartControlPoint*/);
exsurface1.LinksArrowSize(8);
exsurface1.LinksArrowColor(WinApi::RGB2int(255,255,255));
exsurface1.LinksArrowFrameColor(WinApi::RGB2int(0,0,0));
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Element <sha ;;0>A");
com_Elements.Add("Element <sha ;;0>B",COMVariant::createFromInt(164),COMVariant::createFromInt(64));
com_Elements.Add("Element <sha ;;0>B",COMVariant::createFromInt(0),COMVariant::createFromInt(132));
var_Links = exsurface1.Links(); com_Links = var_Links;
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2))).CustomPath("0.5,0.25,0.5,.75");
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(3)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2))).CustomPath("0.5,0.25,0.5,.75");
var_Link = com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(3)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1))); com_Link = var_Link;
com_Link.ShowLinkType(3/*exLinkStraight | exLinkDirect*/);
com_Link.StartPos(0/*LeftAlignment*/);
exsurface1.FitToClient();
exsurface1.EndUpdate();
}
|
|
162
|
Change the size to display the arrow of the link
public void init()
{
COM com_Elements,com_Link,com_Links;
anytype var_Elements,var_Link,var_Links;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowLinkControlPoint(-1/*0xffffffff | exAllowChangeTo | exAllowChangeFrom | exOrthoArrange | exMiddleControlPoint | exControlPoint | exEndControlPoint | exStartControlPoint*/);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Element <sha ;;0>A");
com_Elements.Add("Element <sha ;;0>B",COMVariant::createFromInt(164),COMVariant::createFromInt(64));
com_Elements.Add("Element <sha ;;0>B",COMVariant::createFromInt(0),COMVariant::createFromInt(132));
var_Links = exsurface1.Links(); com_Links = var_Links;
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2))).CustomPath("0.5,0.25,0.5,.75");
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(3)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2))).CustomPath("0.5,0.25,0.5,.75");
var_Link = com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(3)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1))); com_Link = var_Link;
com_Link.ShowLinkType(3/*exLinkStraight | exLinkDirect*/);
com_Link.StartPos(0/*LeftAlignment*/);
com_Link.ArrowSize(8);
exsurface1.FitToClient();
exsurface1.EndUpdate();
}
|
|
161
|
Change the size to display the arrows for all links
public void init()
{
COM com_Elements,com_Link,com_Links;
anytype var_Elements,var_Link,var_Links;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowLinkControlPoint(-1/*0xffffffff | exAllowChangeTo | exAllowChangeFrom | exOrthoArrange | exMiddleControlPoint | exControlPoint | exEndControlPoint | exStartControlPoint*/);
exsurface1.LinksArrowSize(8);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Element <sha ;;0>A");
com_Elements.Add("Element <sha ;;0>B",COMVariant::createFromInt(164),COMVariant::createFromInt(64));
com_Elements.Add("Element <sha ;;0>B",COMVariant::createFromInt(0),COMVariant::createFromInt(132));
var_Links = exsurface1.Links(); com_Links = var_Links;
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2))).CustomPath("0.5,0.25,0.5,.75");
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(3)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2))).CustomPath("0.5,0.25,0.5,.75");
var_Link = com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(3)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1))); com_Link = var_Link;
com_Link.ShowLinkType(3/*exLinkStraight | exLinkDirect*/);
com_Link.StartPos(0/*LeftAlignment*/);
exsurface1.FitToClient();
exsurface1.EndUpdate();
}
|
|
160
|
Extends the caption on the element's width
public void init()
{
COM com_Element;
anytype var_Element;
str var_s,var_s1;
;
super();
var_s = "<solidline> <c><b>Bank Account</b></solidline><br>+ owner: String <r><a 1;e64=gA8ABzABvABsABpABkg8JABuABlAAgAA4AAwisXjMYH0TAECMY";
var_s = var_s + "AjsCMwAM4AkMGhEGOUei0Yl8bkQAOAAlsGmsSlp0h0SgkCF8DgsNhUMhEKiESkYAoMlk8phssmcCltLMNTAFOlFDlc2l0amMxjomAAjAA5AA2tMaHcfplZk1blVDqtuo";
var_s = var_s + "NXjoAAEBA=>▲</a><br><solidline>+ balance: Currency = 0</solidline><br>+ deposit(amount: Currency)<r><a 2;e64=gA8ABjAA+AECM";
var_s = var_s + "wAM8DABvABshoAOQAEAAHAAGEWjEajMGNoAMoAOgANERMgAOcHAAvAEJhcEh0Qh0Tg0CmkqMMFlUuhkxiMTisXjNCjk6EwAEYAHIAG1MjY7lUsnkwh8/nUClk5gwAAEB";
var_s = var_s + "A==>▲</a><br>+ withdraw(amount: Currency)";
var_s1 = "<solidline> <c><b>Bank Account</b></solidline><br>+ owner: String <r><a 1;e64=gA8ABzABvABsABpABkg8JABuABlAAgAA4AAwisXjMYH0TAECMY";
var_s1 = var_s1 + "AjsCMwAM4AkMGhEGOUei0Yl8bkQAOAAlsGmsSlp0h0SgkCF8DgsNhUMhEKiESkYAoMlk8phssmcCltLMNTAFOlFDlc2l0amMxjomAAjAA5AA2tMaHcfplZk1blVDqtuo";
var_s1 = var_s1 + "NXjoAAEBA=>▲</a><br><solidline>+ balance: Currency = 0</solidline><br>+ deposit(amount: Currency)<r><a 2;e64=gA8ABjAA+AECM";
var_s1 = var_s1 + "wAM8DABvABshoAOQAEAAHAAGEWjEajMGNoAMoAOgANERMgAOcHAAvAEJhcEh0Qh0Tg0CmkqMMFlUuhkxiMTisXjNCjk6EwAEYAHIAG1MjY7lUsnkwh8/nUClk5gwAAEB";
var_s1 = var_s1 + "A==>▲</a><br>+ withdraw(amount: Currency)";
var_Element = exsurface1.Elements().Add(COMVariant::createFromStr(var_s)); com_Element = var_Element;
com_Element.ID("Account");
com_Element.X(-128);
com_Element.CaptionSingleLine(1/*exCaptionBreakWrap*/);
com_Element.AutoSize(false);
com_Element.Width(256);
com_Element.Height(com_Element.AutoHeight());
com_Element.CaptionAlign(4);
}
|
|
159
|
Gets the width/height of the element to fit its content ( as if the AutoSize property is True )
// AnchorClick event - Occurs when an anchor element is clicked.
void onEvent_AnchorClick(str _AnchorID,str _Options)
{
COM com_Element;
anytype var_Element;
;
var_Element = COM::createFromObject(exsurface1.Elements()).Item("Account"); com_Element = var_Element;
com_Element.Height(com_Element.AutoHeight());
}
public void init()
{
COM com_Element;
anytype var_Element;
str var_s,var_s1;
;
super();
var_s = "<solidline> <c><b>Bank Account</b></solidline><br>+ owner: String <r><a 1;e64=gA8ABzABvABsABpABkg8JABuABlAAgAA4AAwisXjMYH0TAECMY";
var_s = var_s + "AjsCMwAM4AkMGhEGOUei0Yl8bkQAOAAlsGmsSlp0h0SgkCF8DgsNhUMhEKiESkYAoMlk8phssmcCltLMNTAFOlFDlc2l0amMxjomAAjAA5AA2tMaHcfplZk1blVDqtuo";
var_s = var_s + "NXjoAAEBA=>▲</a><br><solidline>+ balance: Currency = 0</solidline><br>+ deposit(amount: Currency)<r><a 2;e64=gA8ABjAA+AECM";
var_s = var_s + "wAM8DABvABshoAOQAEAAHAAGEWjEajMGNoAMoAOgANERMgAOcHAAvAEJhcEh0Qh0Tg0CmkqMMFlUuhkxiMTisXjNCjk6EwAEYAHIAG1MjY7lUsnkwh8/nUClk5gwAAEB";
var_s = var_s + "A==>▲</a><br>+ withdraw(amount: Currency)";
var_s1 = "<solidline> <c><b>Bank Account</b></solidline><br>+ owner: String <r><a 1;e64=gA8ABzABvABsABpABkg8JABuABlAAgAA4AAwisXjMYH0TAECMY";
var_s1 = var_s1 + "AjsCMwAM4AkMGhEGOUei0Yl8bkQAOAAlsGmsSlp0h0SgkCF8DgsNhUMhEKiESkYAoMlk8phssmcCltLMNTAFOlFDlc2l0amMxjomAAjAA5AA2tMaHcfplZk1blVDqtuo";
var_s1 = var_s1 + "NXjoAAEBA=>▲</a><br><solidline>+ balance: Currency = 0</solidline><br>+ deposit(amount: Currency)<r><a 2;e64=gA8ABjAA+AECM";
var_s1 = var_s1 + "wAM8DABvABshoAOQAEAAHAAGEWjEajMGNoAMoAOgANERMgAOcHAAvAEJhcEh0Qh0Tg0CmkqMMFlUuhkxiMTisXjNCjk6EwAEYAHIAG1MjY7lUsnkwh8/nUClk5gwAAEB";
var_s1 = var_s1 + "A==>▲</a><br>+ withdraw(amount: Currency)";
var_Element = exsurface1.Elements().Add(COMVariant::createFromStr(var_s)); com_Element = var_Element;
com_Element.ID("Account");
com_Element.X(-128);
com_Element.CaptionSingleLine(1/*exCaptionBreakWrap*/);
com_Element.AutoSize(false);
com_Element.Width(256);
com_Element.Height(com_Element.AutoHeight());
com_Element.CaptionAlign(4);
}
|
|
158
|
Expandable-caption
// AnchorClick event - Occurs when an anchor element is clicked.
void onEvent_AnchorClick(str _AnchorID,str _Options)
{
;
print( _AnchorID );
}
public void init()
{
COM com_Element,com_Element1,com_Element2,com_Link;
anytype var_Element,var_Element1,var_Element2,var_Link;
str var_s,var_s1,var_s2,var_s3,var_s4,var_s5;
;
super();
var_s = "<solidline> <c><b>Bank Account</b></solidline><br>+ owner: String <r><a 1;e64=gA8ABzABvABsABpABkg8JABuABlAAgAA4AAwisXjMYH0TAECMY";
var_s = var_s + "AjsCMwAM4AkMGhEGOUei0Yl8bkQAOAAlsGmsSlp0h0SgkCF8DgsNhUMhEKiESkYAoMlk8phssmcCltLMNTAFOlFDlc2l0amMxjomAAjAA5AA2tMaHcfplZk1blVDqtuo";
var_s = var_s + "NXjoAAEBA=>▲</a><br><solidline>+ balance: Currency = 0</solidline><br>+ deposit(amount: Currency)<r><a 2;e64=gA8ABjAA+AECM";
var_s = var_s + "wAM8DABvABshoAOQAEAAHAAGEWjEajMGNoAMoAOgANERMgAOcHAAvAEJhcEh0Qh0Tg0CmkqMMFlUuhkxiMTisXjNCjk6EwAEYAHIAG1MjY7lUsnkwh8/nUClk5gwAAEB";
var_s = var_s + "A==>▲</a><br>+ withdraw(amount: Currency)";
var_s1 = "<solidline> <c><b>Bank Account</b></solidline><br>+ owner: String <r><a 1;e64=gA8ABzABvABsABpABkg8JABuABlAAgAA4AAwisXjMYH0TAECMY";
var_s1 = var_s1 + "AjsCMwAM4AkMGhEGOUei0Yl8bkQAOAAlsGmsSlp0h0SgkCF8DgsNhUMhEKiESkYAoMlk8phssmcCltLMNTAFOlFDlc2l0amMxjomAAjAA5AA2tMaHcfplZk1blVDqtuo";
var_s1 = var_s1 + "NXjoAAEBA=>▲</a><br><solidline>+ balance: Currency = 0</solidline><br>+ deposit(amount: Currency)<r><a 2;e64=gA8ABjAA+AECM";
var_s1 = var_s1 + "wAM8DABvABshoAOQAEAAHAAGEWjEajMGNoAMoAOgANERMgAOcHAAvAEJhcEh0Qh0Tg0CmkqMMFlUuhkxiMTisXjNCjk6EwAEYAHIAG1MjY7lUsnkwh8/nUClk5gwAAEB";
var_s1 = var_s1 + "A==>▲</a><br>+ withdraw(amount: Currency)";
var_Element = exsurface1.Elements().Add(COMVariant::createFromStr(var_s)); com_Element = var_Element;
com_Element.ID("Account");
com_Element.X(-256);
com_Element.Y(-164);
com_Element.CaptionSingleLine(1/*exCaptionBreakWrap*/);
com_Element.CaptionAlign(4);
var_s2 = "<solidline> <c><b>Person</b></solidline><br>+ name: String <r><a 1;e64=gA8ABzABvABsABpABkg8JABuABlAAgAA4AAwisXjMYH0TAECMYAjsCMwA";
var_s2 = var_s2 + "M4AkMGhEGOUei0Yl8bkQAOAAlsGmsSlp0h0SgkCF8DgsNhUMhEKiESkYAoMlk8phssmcCltLMNTAFOlFDlc2l0amMxjomAAjAA5AA2tMaHcfplZk1blVDqtuoNXjoAAE";
var_s2 = var_s2 + "BA=>▲</a><br><solidline># birth: Date</solidline><br>+ getCurrentAge(): int<r><a 2;e64=gA8ABjAA+AECMwAM8DABvABshoAOQAEAAHA";
var_s2 = var_s2 + "AGEWjEajMGNoAMoAOgANERMgAOcHAAvAEJhcEh0Qh0Tg0CmkqMMFlUuhkxiMTisXjNCjk6EwAEYAHIAG1MjY7lUsnkwh8/nUClk5gwAAEBA==>▲</a>";
var_s3 = "<solidline> <c><b>Person</b></solidline><br>+ name: String <r><a 1;e64=gA8ABzABvABsABpABkg8JABuABlAAgAA4AAwisXjMYH0TAECMYAjsCMwA";
var_s3 = var_s3 + "M4AkMGhEGOUei0Yl8bkQAOAAlsGmsSlp0h0SgkCF8DgsNhUMhEKiESkYAoMlk8phssmcCltLMNTAFOlFDlc2l0amMxjomAAjAA5AA2tMaHcfplZk1blVDqtuoNXjoAAE";
var_s3 = var_s3 + "BA=>▲</a><br><solidline># birth: Date</solidline><br>+ getCurrentAge(): int<r><a 2;e64=gA8ABjAA+AECMwAM8DABvABshoAOQAEAAHA";
var_s3 = var_s3 + "AGEWjEajMGNoAMoAOgANERMgAOcHAAvAEJhcEh0Qh0Tg0CmkqMMFlUuhkxiMTisXjNCjk6EwAEYAHIAG1MjY7lUsnkwh8/nUClk5gwAAEBA==>▲</a>";
var_Element1 = exsurface1.Elements().Add(COMVariant::createFromStr(var_s2)); com_Element1 = var_Element1;
com_Element1.ID("Person");
com_Element1.Y(-164);
com_Element1.CaptionSingleLine(1/*exCaptionBreakWrap*/);
var_s4 = "<solidline> <c><b>Student</b></solidline><br><solidline>+ classes: List<Course> <r><a 1;e64=gA8ABzABvABsABpABkg8JABuABlAA+AAgAEC";
var_s4 = var_s4 + "McTi4AMwAM4AjMGhEGOUVAA4AAwk8plcqihwAElg0wiUlOkOiUEgQvgcFhsKhkIhUQiUUnccj0gn0jmMagUlowAMNOpEfkMNkkmlEqrctjQmAAjAA5AA2sssHcbnkdq1";
var_s4 = var_s4 + "Ln1QtVSjQAAEBA==>▲</a></solidline><br>- attend(class: Course)<r><a 2;e64=gA8ABjAA+AECMwAM8DABvABshoAOQAEAAHAAGEWjEajMGNoAM";
var_s4 = var_s4 + "oAOgANERMgAOcHAAvAEJhcEh0Qh0Tg0CmkqMMFlUuhkxiMTisXjNCjk6EwAEYAHIAG1MjY7lUsnkwh8/nUClk5gwAAEBA==>▲</a><br>- sleep()";
var_s5 = "<solidline> <c><b>Student</b></solidline><br><solidline>+ classes: List<Course> <r><a 1;e64=gA8ABzABvABsABpABkg8JABuABlAA+AAgAEC";
var_s5 = var_s5 + "McTi4AMwAM4AjMGhEGOUVAA4AAwk8plcqihwAElg0wiUlOkOiUEgQvgcFhsKhkIhUQiUUnccj0gn0jmMagUlowAMNOpEfkMNkkmlEqrctjQmAAjAA5AA2sssHcbnkdq1";
var_s5 = var_s5 + "Ln1QtVSjQAAEBA==>▲</a></solidline><br>- attend(class: Course)<r><a 2;e64=gA8ABjAA+AECMwAM8DABvABshoAOQAEAAHAAGEWjEajMGNoAM";
var_s5 = var_s5 + "oAOgANERMgAOcHAAvAEJhcEh0Qh0Tg0CmkqMMFlUuhkxiMTisXjNCjk6EwAEYAHIAG1MjY7lUsnkwh8/nUClk5gwAAEBA==>▲</a><br>- sleep()";
var_Element2 = exsurface1.Elements().Add(COMVariant::createFromStr(var_s4)); com_Element2 = var_Element2;
com_Element2.ID("Student");
com_Element2.Y(-64);
com_Element2.CaptionSingleLine(1/*exCaptionBreakWrap*/);
var_Link = exsurface1.Links().Add(COM::createFromObject(exsurface1.Elements()).Item("Account"),COM::createFromObject(exsurface1.Elements()).Item("Student")); com_Link = var_Link;
com_Link.Caption("<fgcolor A0A0A0><solidline 808080> <c><b>Link</b></solidline><br># count: number <r><a ;exp=12992>➤</a>");
}
|
|
157
|
Expandable-caption
public void init()
{
COM com_Element;
anytype var_Element;
;
super();
var_Element = COM::createFromObject(exsurface1.Elements()).Add("<solidline><b>Header</b></solidline><br>Line1<r><a ;exp=show lines>+</a><br>Line2<br>Line3"); com_Element = var_Element;
com_Element.CaptionSingleLine(1/*exCaptionBreakWrap*/);
}
|
|
156
|
Fullfit the caption on the element's width
public void init()
{
COM com_Element;
anytype var_Element;
str var_s,var_s1;
;
super();
var_s = "<solidline><b>Bank Account</b></solidline><br>+ owner: String <r><a 1;properties>+</a><br><solidline>+ balance: Currency = 0</so";
var_s = var_s + "lidline><br>+ deposit(amount: Currency)<r><a 2;methods>+</a><br>+ withdraw(amount: Currency)";
var_s1 = "<solidline><b>Bank Account</b></solidline><br>+ owner: String <r><a 1;properties>+</a><br><solidline>+ balance: Currency = 0</so";
var_s1 = var_s1 + "lidline><br>+ deposit(amount: Currency)<r><a 2;methods>+</a><br>+ withdraw(amount: Currency)";
var_Element = exsurface1.Elements().Add(COMVariant::createFromStr(var_s)); com_Element = var_Element;
com_Element.CaptionSingleLine(1/*exCaptionBreakWrap*/);
com_Element.BackColor(WinApi::RGB2int(248,248,248));
com_Element.AutoSize(false);
com_Element.Width(194);
com_Element.Height(76);
com_Element.CaptionAlign(4);
}
|
|
155
|
Wrap the caption by <br> or "\r\n" sequence only
public void init()
{
COM com_Element;
anytype var_Element;
str var_s,var_s1;
;
super();
var_s = "<solidline><b>Bank Account</b></solidline><br>+ owner: String <r><a 1;properties>+</a><br><solidline>+ balance: Currency = 0</so";
var_s = var_s + "lidline><br>+ deposit(amount: Currency)<r><a 2;methods>+</a><br>+ withdraw(amount: Currency)";
var_s1 = "<solidline><b>Bank Account</b></solidline><br>+ owner: String <r><a 1;properties>+</a><br><solidline>+ balance: Currency = 0</so";
var_s1 = var_s1 + "lidline><br>+ deposit(amount: Currency)<r><a 2;methods>+</a><br>+ withdraw(amount: Currency)";
var_Element = exsurface1.Elements().Add(COMVariant::createFromStr(var_s)); com_Element = var_Element;
com_Element.CaptionSingleLine(1/*exCaptionBreakWrap*/);
com_Element.BackColor(WinApi::RGB2int(248,248,248));
}
|
|
154
|
Display a custom tooltip
// MouseMove event - Occurs when the user moves the mouse.
void onEvent_MouseMove(int _Button,int _Shift,int _X,int _Y)
{
;
exsurface1.ShowToolTip("new content","",,"+8","+8");
}
public void init()
{
;
super();
}
|
|
153
|
Shows the tooltip of the object moved relative to its default position
// MouseMove event - Occurs when the user moves the mouse.
void onEvent_MouseMove(int _Button,int _Shift,int _X,int _Y)
{
;
exsurface1.ShowToolTip("<null>","<null>",,"+8","+8");
}
public void init()
{
COM com_Element;
anytype var_Element;
;
super();
var_Element = COM::createFromObject(exsurface1.Elements()).Add("Element with a Tooltip"); com_Element = var_Element;
com_Element.ToolTip("This is a bit of text that should be displayed when cursor hovers the element.");
}
|
|
152
|
Rename Undo/Redo commands into the control's toolbar
public void init()
{
COM com_Elements;
anytype var_Elements;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowUndoRedo(true);
exsurface1.ToolBarFormat("-1,100,101,|,103,104");
exsurface1.ToolBarCaption(100,"<img>1</img>Acasa");
exsurface1.ToolBarCaption(103,"Anuleaza <img>3</img>");
exsurface1.ToolBarCaption(104,"<img>4</img>Reface");
exsurface1.ToolBarToolTip(100,"Restabileste vizualizarea la origine.");
exsurface1.ToolBarToolTip(101,"Mareste vizualizarea.");
exsurface1.ToolBarToolTip(103,"Anuleaza ultima actiune UI. Pentru a anula o actiune apasati Ctrl+Z.");
exsurface1.ToolBarToolTip(104,"Inverseaza cea mai recenta operatie de anulare. Pentru a reface o actiune apasati Ctrl+Y.");
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Item <b>1",COMVariant::createFromInt(-64),COMVariant::createFromInt(-48));
com_Elements.Add("Item <b>2",COMVariant::createFromInt(32),COMVariant::createFromInt(32));
exsurface1.Links().Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)));
exsurface1.EndUpdate();
}
|
|
151
|
Add Undo/Redo commands to control's toolbar
public void init()
{
COM com_Elements;
anytype var_Elements;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowUndoRedo(true);
exsurface1.ToolBarFormat("-1,100,101,|,103,104");
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Item <b>1",COMVariant::createFromInt(-64),COMVariant::createFromInt(-48));
com_Elements.Add("Item <b>2",COMVariant::createFromInt(32),COMVariant::createFromInt(32));
exsurface1.Links().Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)));
exsurface1.EndUpdate();
}
|
|
150
|
Clear Undo/Redo queue (method 2)
public void init()
{
COM com_Elements;
anytype var_Elements;
int c;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowUndoRedo(true);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Item <b>1",COMVariant::createFromInt(-64),COMVariant::createFromInt(-64));
com_Elements.Add("Item <b>2");
exsurface1.Links().Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)));
c = exsurface1.UndoRedoQueueLength();
exsurface1.UndoRedoQueueLength(0);
exsurface1.UndoRedoQueueLength(c);
print( exsurface1.UndoListAction() );
exsurface1.EndUpdate();
}
|
|
149
|
Clear Undo/Redo queue (method 1)
public void init()
{
COM com_Elements;
anytype var_Elements;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowUndoRedo(true);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Item <b>1",COMVariant::createFromInt(-64),COMVariant::createFromInt(-64));
com_Elements.Add("Item <b>2");
exsurface1.Links().Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)));
exsurface1.AllowUndoRedo(true);
print( exsurface1.UndoListAction() );
exsurface1.EndUpdate();
}
|
|
148
|
Removes Redo operations
public void init()
{
COM com_Elements;
anytype var_Elements;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowUndoRedo(true);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Item <b>1",COMVariant::createFromInt(-64),COMVariant::createFromInt(-64));
com_Elements.Add("Item <b>2");
exsurface1.Links().Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)));
exsurface1.Undo();
exsurface1.RedoRemoveAction(COMVariant::createFromInt(10));
print( exsurface1.RedoListAction() );
exsurface1.EndUpdate();
}
|
|
147
|
Removes Undo operations
public void init()
{
COM com_Elements;
anytype var_Elements;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowUndoRedo(true);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Item <b>1",COMVariant::createFromInt(-64),COMVariant::createFromInt(-64));
com_Elements.Add("Item <b>2");
exsurface1.Links().Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)));
exsurface1.UndoRemoveAction(COMVariant::createFromInt(10));
print( exsurface1.UndoListAction() );
exsurface1.EndUpdate();
}
|
|
146
|
Record the UI operations as a block of undo/redo operations
public void init()
{
COM com_Elements;
anytype var_Elements;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowUndoRedo(true);
exsurface1.StartBlockUndoRedo();
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Item <b>1",COMVariant::createFromInt(-64),COMVariant::createFromInt(-64));
com_Elements.Add("Item <b>2");
exsurface1.Links().Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)));
exsurface1.EndBlockUndoRedo();
print( exsurface1.UndoListAction() );
exsurface1.EndUpdate();
}
|
|
145
|
Groups the next to current Undo/Redo Actions in a single block
public void init()
{
COM com_Elements;
anytype var_Elements;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowUndoRedo(true);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Item <b>1",COMVariant::createFromInt(-64),COMVariant::createFromInt(-64));
com_Elements.Add("Item <b>2");
exsurface1.Links().Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)));
exsurface1.GroupUndoRedoActions(3);
print( exsurface1.UndoListAction() );
exsurface1.EndUpdate();
}
|
|
144
|
Limits the number of entries within the Undo/Redo queue
public void init()
{
COM com_Elements;
anytype var_Elements;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowUndoRedo(true);
exsurface1.UndoRedoQueueLength(1);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Item <b>1",COMVariant::createFromInt(-64),COMVariant::createFromInt(-64));
com_Elements.Add("Item <b>2");
exsurface1.Links().Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)));
print( exsurface1.UndoListAction() );
exsurface1.EndUpdate();
}
|
|
143
|
Lists the Redo actions that can be performed on the surface
public void init()
{
COM com_Elements;
anytype var_Elements;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowUndoRedo(true);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Item <b>1",COMVariant::createFromInt(-64),COMVariant::createFromInt(-64));
com_Elements.Add("Item <b>2");
exsurface1.Links().Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)));
exsurface1.Undo();
print( exsurface1.RedoListAction() );
exsurface1.EndUpdate();
}
|
|
142
|
Lists the Undo actions that can be performed on the surface
public void init()
{
COM com_Elements;
anytype var_Elements;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowUndoRedo(true);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Item <b>1",COMVariant::createFromInt(-64),COMVariant::createFromInt(-64));
com_Elements.Add("Item <b>2");
exsurface1.Links().Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)));
print( exsurface1.UndoListAction() );
exsurface1.EndUpdate();
}
|
|
141
|
Checks whether the Undo operation is possible
public void init()
{
COM com_Elements;
anytype var_Elements;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowUndoRedo(true);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Item <b>1",COMVariant::createFromInt(-64),COMVariant::createFromInt(-64));
com_Elements.Add("Item <b>2");
exsurface1.Links().Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)));
exsurface1.Undo();
print( "CanRedo" );
print( exsurface1.CanRedo() );
exsurface1.EndUpdate();
}
|
|
140
|
Call Redo by code
public void init()
{
COM com_Elements;
anytype var_Elements;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowUndoRedo(true);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Item <b>1",COMVariant::createFromInt(-64),COMVariant::createFromInt(-64));
com_Elements.Add("Item <b>2");
exsurface1.Links().Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)));
exsurface1.Undo();
exsurface1.Redo();
exsurface1.EndUpdate();
}
|
|
139
|
Checks whether the Undo operation is possible
public void init()
{
COM com_Elements;
anytype var_Elements;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowUndoRedo(true);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Item <b>1",COMVariant::createFromInt(-64),COMVariant::createFromInt(-64));
com_Elements.Add("Item <b>2");
exsurface1.Links().Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)));
print( "CanUndo" );
print( exsurface1.CanUndo() );
exsurface1.EndUpdate();
}
|
|
138
|
Call Undo by code
public void init()
{
COM com_Elements;
anytype var_Elements;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowUndoRedo(true);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Item <b>1",COMVariant::createFromInt(-64),COMVariant::createFromInt(-64));
com_Elements.Add("Item <b>2");
exsurface1.Links().Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)));
exsurface1.Undo();
exsurface1.EndUpdate();
}
|
|
137
|
Save the element's properties for Undo/Redo operations, by code
public void init()
{
COM com_Elements,com_Link;
anytype var_Elements,var_Link;
int h;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowUndoRedo(true);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Item <b>1",COMVariant::createFromInt(-64),COMVariant::createFromInt(-64));
com_Elements.Add("Item <b>2");
exsurface1.StartBlockUndoRedo();
var_Link = exsurface1.Links().Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2))); com_Link = var_Link;
h = com_Link.StartUpdateLink();
com_Link.Color(WinApi::RGB2int(255,0,0));
com_Link.Width(2);
com_Link.ShowDir(false);
com_Link.ShowLinkType(2/*exLinkStraight*/);
com_Link.EndUpdateLink(h);
exsurface1.EndBlockUndoRedo();
exsurface1.EndUpdate();
}
|
|
136
|
No color is restored for the link when Undo/Redo operation is executed
// AddElement event - A new element has been added to the surface.
void onEvent_AddElement(COM _Element)
{
// Element.ShowCheckBox = True
// Element.CheckBoxAlign = 2
;
}
public void init()
{
COM com_Element,com_Elements,com_Link;
anytype var_Element,var_Elements,var_Link;
int h;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowUndoRedo(true);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Check <b>1",COMVariant::createFromInt(-64),COMVariant::createFromInt(-64));
var_Element = COM::createFromObject(com_Elements.Add("Check <b>2")); com_Element = var_Element;
com_Element.Checked(1/*exChecked*/);
exsurface1.StartBlockUndoRedo();
var_Link = exsurface1.Links().Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2))); com_Link = var_Link;
h = com_Link.StartUpdateLink();
com_Link.Color(WinApi::RGB2int(255,0,0));
com_Link.Width(2);
com_Link.ShowDir(false);
com_Link.ShowLinkType(2/*exLinkStraight*/);
com_Link.EndUpdateLink(h);
exsurface1.EndBlockUndoRedo();
exsurface1.EndUpdate();
}
|
|
135
|
Save the element's properties for Undo/Redo operations, by code
public void init()
{
COM com_Element;
anytype var_Element;
int h;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowUndoRedo(true);
exsurface1.Elements().Add("Item <b>1",COMVariant::createFromInt(-64),COMVariant::createFromInt(-64));
exsurface1.StartBlockUndoRedo();
var_Element = COM::createFromObject(exsurface1.Elements()).Add("Item <b>2"); com_Element = var_Element;
h = com_Element.StartUpdateElement();
com_Element.BackColor(WinApi::RGB2int(0,0,0));
com_Element.ForeColor(WinApi::RGB2int(255,255,255));
com_Element.BorderColor(WinApi::RGB2int(255,0,0));
com_Element.EndUpdateElement(h);
exsurface1.EndBlockUndoRedo();
exsurface1.EndUpdate();
}
|
|
134
|
No color is restored for the element when Undo/Redo operation is executed
public void init()
{
COM com_Element;
anytype var_Element;
int h;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowUndoRedo(true);
exsurface1.Elements().Add("Item <b>1",COMVariant::createFromInt(-64),COMVariant::createFromInt(-64));
exsurface1.StartBlockUndoRedo();
var_Element = COM::createFromObject(exsurface1.Elements()).Add("Item <b>2"); com_Element = var_Element;
h = com_Element.StartUpdateElement();
com_Element.BackColor(WinApi::RGB2int(0,0,0));
com_Element.ForeColor(WinApi::RGB2int(255,255,255));
com_Element.BorderColor(WinApi::RGB2int(255,0,0));
com_Element.EndUpdateElement(h);
exsurface1.EndBlockUndoRedo();
exsurface1.EndUpdate();
}
|
|
133
|
How can I ensure that a specified element fits the surface's visible area
public void init()
{
COM com_Element,com_Elements,com_Pattern;
anytype var_Element,var_Elements,var_Pattern;
;
super();
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
var_Element = COM::createFromObject(com_Elements.Add("Element A",COMVariant::createFromInt(-100))); com_Element = var_Element;
var_Pattern = com_Element.Pattern(); com_Pattern = var_Pattern;
com_Pattern.Type(6/*exPatternBDiagonal*/);
com_Pattern.Color(WinApi::RGB2int(224,224,224));
var_Element = COM::createFromObject(com_Elements.Add("Element B",COMVariant::createFromInt(2000))); com_Element = var_Element;
com_Element.EnsureVisible();
}
|
|
132
|
LayoutEndChanging(exUndo), LayoutEndChanging(exRedo) or LayoutEndChanging(exUndoRedoUpdate) notifiy your application once a Undo/Redo operation is executed (CTRL+Z, CTRL+Y) or updated
// AddElement event - A new element has been added to the surface.
void onEvent_AddElement(COM _Element)
{
// Element.ShowCheckBox = True
// Element.CheckBoxAlign = 2
;
}
// LayoutEndChanging event - Notifies your application once the control's layout has been changed.
void onEvent_LayoutEndChanging(int _Operation)
{
;
print( "LayoutEndChanging" );
print( _Operation );
}
public void init()
{
COM com_Element,com_Elements;
anytype var_Element,var_Elements;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowUndoRedo(true);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Check <b>1",COMVariant::createFromInt(-64),COMVariant::createFromInt(-64));
var_Element = COM::createFromObject(com_Elements.Add("Check <b>2")); com_Element = var_Element;
com_Element.Checked(1/*exChecked*/);
exsurface1.Links().Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)));
exsurface1.EndUpdate();
}
|
|
131
|
Turn on the Undo/Redo feature
// AddElement event - A new element has been added to the surface.
void onEvent_AddElement(COM _Element)
{
// Element.ShowCheckBox = True
// Element.CheckBoxAlign = 2
;
}
public void init()
{
COM com_Element,com_Elements;
anytype var_Element,var_Elements;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowUndoRedo(true);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Check <b>1",COMVariant::createFromInt(-64),COMVariant::createFromInt(-64));
var_Element = COM::createFromObject(com_Elements.Add("Check <b>2")); com_Element = var_Element;
com_Element.Checked(1/*exChecked*/);
exsurface1.Links().Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)));
exsurface1.EndUpdate();
}
|
|
130
|
ImageSize property on 32 (specifies the size of control' icons/images/check-boxes/radio-buttons)
// AddElement event - A new element has been added to the surface.
void onEvent_AddElement(COM _Element)
{
// Element.ShowCheckBox = True
;
}
public void init()
{
COM com_Appearance,com_Element,com_Element1,com_Elements;
anytype var_Appearance,var_Element,var_Element1,var_Elements;
str var_s,var_s1,var_s2,var_s3;
;
super();
exsurface1.BeginUpdate();
exsurface1.ImageSize(32);
exsurface1.Font().Size(16);
var_s = "gBJJgBAIDAAEg4AEEKAD/hz/EMNh8TIRNGwAjEZAEXjAojKAjMLjABhkaABAk0plUrlktl0vmExmUzmk1m03nE5nU7nk9miAoE+oVDolFo1HpFJpU5h8Sf9OqFNqUOqN";
var_s = var_s + "UqdPq9VrFWrlbr1QpdhAFAkFis1ntFptVrtkrpszrNvmVxqk3uVtm1kmF3sdBvF/wGBmV+j9BYGHwWJulfxdax2NyFdx2JlV6l9Nw7AAGZymdz2Cy2GxErvWcz9ivlwy";
var_s = var_s + "V21cuxugwktzGIzmvwtl0+53U5y0a0Wazmmyu/3dCyOMyXHx/J5nIr9q3uyqnBxFN3G46ma4vb7mD2Ng4nZze00fDkHC7t7us2rOX5tguetpHRlmz4HVqnXk1PjHO+CM";
var_s = var_s + "Po9MBMC+j2vC8j7wS8cFNI4kBo05UIvfCT/NsnsApU+0Fqg/T+oy/kPxC0sEQfErKQK96+w28UWRI8UGvO8sTLS9r2PWmsMJTDTask3CsIbIEQRA3shOXEEAO/GclJ9F";
var_s = var_s + "EKrrA8FRbKMXRIlb0JxCkjS1LMswhCcvuel0cv26cSMa8Ufx+2sQwhEUoSXOCjSbLcnxjKc7sdKUVyq28NtVI71P9P7JxtQEapjQ6fzfM8zPfNE2PhIsLL63E40slk5y";
var_s = var_s + "7N89LcyU9SvMb3SdUc6VJLj5VLVLfO/PS9KzNFHUa/0XyBD0dxlS9cxhMlTRSoNXypPErWDPyfNS+MwprRNO0FD8wVVZ1AI08URwVRjtJ1WCn21QkkUrXVLVPQS/XIkF";
var_s = var_s + "gTxT9iONZ9xVTdq+L1eKg3kkF6Upe68XtfV51/MtrVjBlwYFL1ev8y1/P6/lyzzYl02wntj0RVFmS1Qa+M5as93QxEUW9e993rfmQ2+vy65M/mL1lhl/2bj2ByVduMtN";
var_s = var_s + "hCJT9hdz41nN14Ld12Z9UjfI/oUAaGseiw6+uFLLhcVabJOS5RqOE0BHlZ5VnEr5fOMs3st+aa/bbRzrJGV51Y0b0DbqaWXZD90hIsPbjWu52+6Wyadpe66hhO+P/Xio";
var_s = var_s + "W5rD8ZbrUZuVg6n1dsE/cXmewu1m9PVwnd35/nueXho/NaJzmjc61W76esuT77eG8pTquy9TwWH8LEzG8RDfFalx3Gcfvna9rvG/cptGLd9tuI6TZOP5Fiqi99vea+X4";
var_s = var_s + "VRcBq/JZZtVQ9cwSs5lsXE372+a9z7PbfB3VVqHyvMctLto8uob6eV0m/cD6MN2v+T33t6sBut42vdv2bJ8a997x2maFJfK+qArbGJPEKE+1qTflMsIdW/GCJX17KcT6";
var_s = var_s + "/czr/X+u1g29B7j/4BQfWkkx4zIHisjhPCmE0K4SwtXM+d4BvHRwNZOoBph9IJvPek9d40FoMJxf691jj2ywQQcHEWET4XJwkTszlVqm2GokewxtBT1DpQjRxDN0rUVD";
var_s = var_s + "NKdC3lb6tzNOwh6upMSSYfv4YBCl/bsn9PxiFCEo7SI6Obc9HeOrnY8x4jtHtdpN4GRbaorhsbu18Pph5CiHymI0RpSXGJ/z2oUOxYxG858AyiI+bfJtuTcG5yelBJyT";
var_s = var_s + "8okhqFd4a5yxL0rvulYtKCsZiWxWkc1s1cRoxxwhA31DLE0mR9l9HqX8fJgTDmFMVH0MIsRzVYnwnMi1dyzmhLt2kS2pxIiU62Wj5ptQGlSYFakLonTUJNLKaM5Wzlff";
var_s = var_s + "EkuFkk5wTrhVO2eE7G6lJhxFFYUZ55zmn0WuBCD4pzhirFCKkbomsOoIYmZx5p90LoYWGPdD5g0QmJRKYxbZ6zYoVQ2jVGylSak7KSkFH6RSjpHKFuU+YMyNo5SulkC6";
var_s = var_s + "I0vonTCitMXPoEpVS2H5FQfEqp2R1opIgAEkJISYARTCukOhmPNI5Ex/wzGHUsicMwA1LHgQ90Y/KpoQHAD+pB/R4NzIaMAB9Xaw1gqaAOsh/A/ptIkWUfhGK1kZH8Rg";
var_s = var_s + "H5GqvgArqRmt4AAPrTroRofBGADkqr6Rmu4D7CEaHARiwpJrEEZsXXwlVjyMWRsaRqwdkLGNBABZmytmyMnaINZqyVpLR2ftKAAAdd6h2osbaskdiq4EZtgSmyNcbVWR";
var_s = var_s + "JNXe3AA7REar3b0stlAAXBtoRmvJGLjEYAHUWsFcwCD/rnaop9aEICMAPdK5hT6xpeuzdOtAgKuJeGfdq6ggEbkTvAP+p9UCHXrvKkcgIA==";
exsurface1.Images(COMVariant::createFromStr(var_s));
var_Appearance = exsurface1.VisualAppearance(); com_Appearance = var_Appearance;
var_s1 = "gBFLBCJwBAEHhEJAAEhABfICg6AADACAxRDgMQBQKAAzQFAYbhkGCGAAGMZxRgmFgAQhFcZQSKUOQTDKMIziaQAGgkNQwCSLIwjNIsBxPFKVQChEYxSjKA40SJNUgyj6";
var_s1 = var_s1 + "CCY+QLIE5PfQgAL9I6eJABCCSQKkYx0HScRiwPBIbAZAYhCZqaKhWgkKI/WBQIABRDVLx5ESiLRtKy7Mq2bpvXBcNxXHalaztO68LxvKyqHb5fJ/PpgL4YHgmC4NQ7EM";
var_s1 = var_s1 + "RwF6rfbyfZ7Xg/ORPTijZ4sdzMHTzJyscx3HqfaBoOaZU5eMLceTUMofHIndxCcasPbsOatVqjG5sYjcGC3La9cz3Pq/bpuDCbMxuaK1TrYXr1TTrcofBDldAxXRKDxR";
var_s1 = var_s1 + "DWVhLnYOw9i6XxzjuXprCaOoKB6EwbiCZZCGOdZYlcT4xHmbhMnwNxtn+G5bmqdZ7n4Pw/i+X5zm+dQ9g4CAFjsfAJheOI8HsDoWDWTB/lwSAQkmA5PEgRYoDyDwYFYF";
var_s1 = var_s1 + "oFmGCBmBqBphDgRJ0gOTIYBGRB/lyRh0iSCZbjYWJzgWDwIjYLoLmMCJGDKDJjBgWgqG6YhyhGHRzA2aJ1mCABOAiOJvhCZBJBYRoRmSCQmEqEQimkAZgg8TZnDCV4Uk";
var_s1 = var_s1 + "mCUmBKZYJGYWoWCUUhiFMNZckNUh2GENoaGaGZmgmJhqhqZpGGIEx2GYIxSGGGJdggWJth2Z4JmYeoemeSZ2H6H4hGmQhihyTRHGYLg7CiCgmgqIpokoNoOiOaJ4jqAo";
var_s1 = var_s1 + "chqaZGgaCxpAoZoaiaaJqEmWIcGgShcnCJwqEqFoR3YOoFlgchflqNouiuawHmWSYqGkWZQhcatzmaOoumuSp2j6L5bBaKo0GQKRnGGCxqiyCwmkqMpsksNpOGUGI7A0";
var_s1 = var_s1 + "ew1G0Rxlg0PptgsZuDG2Sx2l6N5tnYNZZjUDRXDCVo5l2FoymqOpukuNpujubwLjmWY5k0ZwxkaFxYlWdp6j6b5Lnafo/nABQdg2FxcUsY5BkmXAkmeQpckwNRrkKTh8";
var_s1 = var_s1 + "CSHZBk4NwyC4KxxgMDwakOMZDn8GgwnGAo2C4cwthMcwmCcMoHBMHRehwTIghySYNksZwcH4HBMEsHx5hyPItiweYxnwSZEH4Mozn0fR+DMAo7EYJ50gkdZelKdNql2U";
var_s1 = var_s1 + "gJn0GIukwH4HicQRai2GI4mSVpNl0dZGledgNgcYpYDWUx3FsOQi5YV5anaTY3G6W53A2RxylydxFjiaxEFCCgBBAQ==";
com_Appearance.Add(1,COMVariant::createFromStr(var_s1));
var_s2 = "gBFLBCJwBAEHhEJAAEhABcoFg6AADACAxRDgMQBQKAAzQFAYbhkGCGAAGMZxRgmFgAQhFcZQSKUOQTDKMIziaQAGgkNQwCSLIwjNIsBxPFKVQChEYxSjKA40SJNUgyj6";
var_s2 = var_s2 + "CCY+QLIE5PfQgAL9I6eJABCCSQKkYx0HScRiwPBIbAZAYhCZqaKhWgkKI/WBQIABRDVLx5ESiLRtKy7Mq2bpvXBcNxXHalaztO68LxvKyqHb5fJ/PpgL4YHgmC4NQ7EM";
var_s2 = var_s2 + "RwF6rfbyfZ7Xg/ORPTijZ4sdzMHTzJyscx3HqfaBoOaZU5eMLceTUMofHIndxCcasPbsLpOS5LNKsaxmWLYdhFdTxQi6LpvfA8BwXC6JY7heRYRbFbYxRjGNi1TS7G4n";
var_s2 = var_s2 + "GKd5WGuL4UHwI4VkaYxii8V4pgQMgVBQdQ5iCTYGi8T4vlWbJ3nuPg+l+H5AlSCg6ByPBoE8Ap3jqYxhBido5g0OgOGOGI4CsSpCCAcgcAuEokiEN5NCKfJ9DyTRjnSc";
var_s2 = var_s2 + "g1CEYxOBmBpPCgagdgcIZoHoGIFA4AxQkCAxKAgKBwgGSpIBCZhjF2E5UnQPQMiMCJBCIBwxkSQgsgo+JtDKT4ziiQw+k6EwAnsOgLnkHI+yCQ4iEuE4klkPhShEJBpA";
var_s2 = var_s2 + "oPgymOMoaDgHBjFMBgyD0HYTiCZSZhIIIGC4ChiHSew5kwM5omILZPiOBI0hwZw5kodIdA+M4Uj4PxOmMSJ9DuTQzmyZgviceZagaHVfj4awwmaAh2GUIYmCOEZZDaDR";
var_s2 = var_s2 + "DFGdwcg4EwyHMN4LBOaJbCoaZqgKH8qkMfIyD8DozDyfA7A0Coui0OpMmOZJdCsahKg6NooioChwmEMxLEoXJbDUTRXGSUgykyMgQG0GpPHMdI3D4TRCgSeQ0kmaw+lG";
var_s2 = var_s2 + "NAtCOZJVCiT5DhyRQwAqMg0EoDBBGEGAsASC5yiSCw+k4Mp6lWNQuksTpRjMTxDGzJwGmGMpDDKXYTECSAxl6Q5olkK4PgMMIVkASRMBMBgzEkaZEjsNALhIZA6AeQBg";
var_s2 = var_s2 + "k0ZJEgAAJ0CIAgODMNIsD6DRih9uYwFyAwfCUb5ijmbI+gwdxkk8MZMGeMpPCkDxzBiC5MHMPJLDSSROFMLIoBEQogEMFJPnENYQGgE4DCOaJfC7tYkhGTQ0kyWwykuX";
var_s2 = var_s2 + "pMiyRpKjKR4wngM4JmOWJACCdYtHMWw+Eych4nINYLAEYA8AgdAEEsQZajaQoog4GxPiMVIolcdxNG8XZVkmNoRwWRVBlFeFEeAZQJgnFiHgHwcAhjhHgGMSI5xki2Cy";
var_s2 = var_s2 + "A4EQsA3i0HkBsLwKRFgAHcPkHopBJBcBeDUYI7xyDOHqKkWo2hLCsDIBIY4qQ5A8DoMMYwOAqCSBGKgU4yB2iDBwIgB4hxQgAAWNgBoAgsBdEcBUQ4sQ9A/HqD0JI8Rp";
var_s2 = var_s2 + "BzH2OYVgahLBHFiJQJweQiDhDUE4SAARQAzFsG0EQwA6AOWSBkFgVAIBCHeGERQFQiCQHeFkC4vkiB8DyB4F4QxVDvGMNEOQexMjlBeOAKQiQLgfDA7QEAaRiBdEkH8T";
var_s2 = var_s2 + "I7AZiFBAGYBIABWjYBiGACioQ4C1A+AMMgWhfgxHgPsT4URIB0COKgPgjRwiAB8AYUArxBgCF6J4GY5hrAOCAPAAoGRRCsCIMEXATXfgAF8BMJwURuEQDgD4Q4OBoAeH";
var_s2 = var_s2 + "GFgLIwQrC2D0JoSQ+QvhrHoSgQI8AbDFGID8C4Ah6BQAQAASACwgCYCMAUMARAvCKAiAMCAokeCKBEOAKgCBoDaHuMsEAqwJDiACDURg8R6gPCyDofYWAhgoDIJ4ZAuh";
var_s2 = var_s2 + "oiGAYGgRoQw/A0GMMga4GwxiEDeIYYInATCDBQAoBAwAoDlA0KMBoVRGiDGwDQUYIRsgaGGDgM4LAwDWB8EcIA1APhjEgGQVwgRIgjFIIQHokgZA+CSEkLIKQSjHAwMs";
var_s2 = var_s2 + "CwDAsAEB2ABTIwRwD6A8CMToSxkAxE4HYIw+BsgbBEDAHYBwojCBoIYFgXSjABE4MsHIbQWhlGILQS4UhvBdAUKEEwHgxDAAABQQQUAhgKHiDwE4JS4A7BGLQZwCR4ga";
var_s2 = var_s2 + "BEMUYAqgKApHgGwVAIRNgvBMMQXImwZDtE4I8UIyAZCDCAE8AwrhgAdEEBACQLRCg4FEB4AYtA7CdEiPQMoJAMDNCkOMCAXAFDhH0D0Q4EgfAaGSK4NYzRUj9BuCgAgs";
var_s2 = var_s2 + "wOBjB4Fqpw8B2ADAwE4A4Qx2DAE6JIaQPQGhAGKBcIQ5B5gHByKIFARwADbAyKUfgdBKBBGyEcVIAB/ijHoIoSA0gdBNl+OATYERZgBGSDYWIWAUCEGKA4FAhR7CIBtY";
var_s2 = var_s2 + "QGYZg4CMAiKEcAOwkBjHWE8Z4lQgA+DkBoTohwwCeAaMEEgBQCCABgHMRwQRhhMEWFQd4HwZgwDqFESItAbAGEANCpINAzANCCJkK4ah+heFYBURwsQrS2CsMYMoWGBh";
var_s2 = var_s2 + "YDWI0EInQgiApXaOVI1QFDsC8MUNoMBMA1HMJga4eh+BeAWOgNNowGjYzCGAAwax+iJBeBVT4gxoBIAGFsJFBxgBiGKFkKQ7g5DFFQEcAo4AzDDACKEQQLgCiJDYB0Mg";
var_s2 = var_s2 + "RBCCQAgQEA==";
com_Appearance.Add(2,COMVariant::createFromStr(var_s2));
var_s3 = "gBFLBCJwBAEHhEJAAEhABQ4Fg6AADACAxRDgMQBQKAAzQFAYbhkGCGAAGMZxRgmFgAQhFcZQSKUOQTDKMIziaQAGgkNQwCSLIwjNIsBxPFKVQChEYxSjKA40SJNUgyj6";
var_s3 = var_s3 + "CCY+QLIE5PfQgAL9I6eJABCCSQKkYx0HScRiwPBIbAZAYhCZqaKhWgkKI/WBQIABRDVLx5ESiLRtKy7Mq2bpvXBcNxXHalaztO68LxvKyqHb5fJ/PpgL4YHgmC4NQ7EM";
var_s3 = var_s3 + "RwF6rfbyfZ7Xg/ORPTijZ4sdzMHTzJyscx3HqfaBoOaZU5eMLceTUMofHIndxCcasPbsLpOS5LNKsaxmWLYdhFdTxQi6LpvfA8BwXC6JY7heRYRbFbYxRjGNi1TS7G4n";
var_s3 = var_s3 + "GKd5WGuL4UHwI4VkaYxii8V4pgQMgVBQdQ5iCTYGi8T4vlWbJ3nuPg+l+H5AlSCg6ByPBoE8Ap3jqYxhBido5g0OgOGOGI4CsSpCCAcgcAuEosiYN5NHMOJ+D4TpTnSe";
var_s3 = var_s3 + "Q7CEY4uBmBpPhgagdgcIZoHibIEyUBJZDQIJShoCgcCAcoyAQOYYlcZJ1D0DxDCiQgwEiAZMHEMJLFKPJ9D2DoDnidQ4k+Y5QmKEROBkIhKD0JIZDIS4TGUCQuEeEJjn";
var_s3 = var_s3 + "OIg8CuY4RkYNgwGMM5RllGpThDRYIGKZIpCkJFUH0PINyWcQ3CaaZCG+HBnEOTJhD8Tx4GoeQ/GcaZSHOH5nCmQhshoZhihYYwhiYA4RlkNoNEMUZ3ByDjwEsPxOnMaJ";
var_s3 = var_s3 + "9DuDR6F6GYmCmKh0nANtMioP4Gg8aoSiIO5NhodociqaY6GaFYkEyOg8lsNRNTaUgykyMgQG0GpPiONJbD8DpDEyfA6k0KwOkWMQsGsAJU0SagwkoJQJDIPISCQCJTGS";
var_s3 = var_s3 + "UwyGaM4KkmMgtksHpFjAZ4TGCBAbgaSpcksdhNAMIJHHsD5TjSWWMAMOpwjyLwbk6cAz0KRJiDkDYzESCwiggcgcgYIQwCIEINCMCITj6TVxkMXp2j0cQLlCTo7E2F4y";
var_s3 = var_s3 + "mkMZdhMPJHDGHpLAyVg+k4UwrCCSIyByDJ8DuDY8CiWY0kiXAXC6QJwFKGIjCeJpjgyezjlyDw6klHx5myRoMGwZwbkcToTEiew4kwbQfEmUgPkOKJUD4DpTHSHQmgkX";
var_s3 = var_s3 + "I/ASTA1g0XIEDMTBimyfI7jSLYHEiUoPk0Fw/kadAsHGao8A0A5smEMJ2mNyg5gzJZwDgCpChyIZVyIZwFCMJEPASRkBqE+IcHInRcDxA2H4bIsx0AtDsIBpwZwYicD6";
var_s3 = var_s3 + "BscwDwUBgHCIYaIfgtiVH2O4WgUwJjEFeAEQA7y4hMCiBMS4aRdB9A4CYE4LxljyBMHcDItBxinDCLcTYmgejBFQ9UTg9gFBOEmAQTI7A4iZGMGkQAWQ7jYA2HIL8BRA";
var_s3 = var_s3 + "jDG4HcCwARbjZHiNoDw1nLDnGyNINQ+wjCpBMEgcovQUgICQJEcgWRuBvAyJ4d4ugpCUAINcHogxIgnDiM4N4axzD3F2JMTY/hRqYF6FsWIxhYAGGoAALQYgYirBwBEB";
var_s3 = var_s3 + "wpAjBEAAIEIYsA2gOHCMAGgXAACIDmMITAUgFABH0D0I4WwvhNFGMAOIvxRD2GKNcMA8gjAPDCPwBogRPAxA8PgRwZRICYDED8RAXQEghEAN8DIgwIBdB4JYWwMgtiQH";
var_s3 = var_s3 + "oFQKAiRFguFKGwGQhglDsEOVwEQQRkCKBwOIHgSREDRBYHEXQcQdD7GIGARQHRxipBrMobgewDCUCADsEYWAzgMHKHQDQxxsDzA6EMfAeQHB4GQDkUYPA0iECiKoGgRh";
var_s3 = var_s3 + "cDdA2GMQA8AOCjDSPgHI4QnApAKBICwHg1A+BcAwcYsgbjGGQNkCIgRsA6EcBEWANADjsB0B8YYzQQDIGSBcEYZBCCPEkFIHQSgkgZAwG4IwBAbAYGGAgL4Ch4g8BOCQ";
var_s3 = var_s3 + "AA2KKC0GcAke4AAXAFCoHkDw4xbBFEcJkE4JRSiEFeJYKQVRMgJHODwX4xAgC/AsIIZAeAHDRG0HYI40RKCLEGDUI4jAghwBWIceA+whCpHMFYZYOQxglDMHMBQGxYjV";
var_s3 = var_s3 + "HiAoBIPgfgHGwPsHYJRSB6A0IERQLhCjJHMA4OQoAoCOACLYGYSx8DpBQIMWQdRnDRH+DsE4fB3CeAmM67kAAXBFEIDYDI7wLBtEoEIfYNwjiUGGJQYQMAjCHEAO0C4z";
var_s3 = var_s3 + "xW29CoCgfIxR9AKA6J8BgUAIhDGMIoJ40hqgwCgKETgnBhhqCGI0AIqgZhGDANQDIlBDCRGkCoJISR0g1BSKQOgfAzBRG0DYHARh4DeDAOwANuw8ApCKKkYg/RPhjBsH";
var_s3 = var_s3 + "0J4yg5hPGWN0GwFBHQBFaDoQIURljFAoB4GgzRVzbBECQFQRQoguHGHANwDRdCKy8CgSIGwhhoDYJYYI1giBICSAEgI=";
com_Appearance.Add(3,COMVariant::createFromStr(var_s3));
exsurface1.Background(70/*exCheckBoxState0*/,0x1000000);
exsurface1.Background(71/*exCheckBoxState1*/,0x2000000);
exsurface1.Background(72/*exCheckBoxState2*/,0x3000000);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
var_Element = COM::createFromObject(exsurface1.Elements()).Add("Element Check 1",COMVariant::createFromInt(-64),COMVariant::createFromInt(-64)); com_Element = var_Element;
var_Element1 = COM::createFromObject(com_Elements.Add("Child")); com_Element1 = var_Element1;
com_Element1.Parent(var_Element);
com_Element.Pictures("1/2");
com_Element.Expanded(false);
var_Element1 = com_Elements.Add("Element Check 2",COMVariant::createFromInt(32),COMVariant::createFromInt(96)); com_Element1 = var_Element1;
com_Element1.Checked(1/*exChecked*/);
com_Element1.Pictures("1,2");
exsurface1.Home();
exsurface1.EndUpdate();
}
|
|
129
|
ImageSize property on 16 (default) (specifies the size of control' icons)
// AddElement event - A new element has been added to the surface.
void onEvent_AddElement(COM _Element)
{
// Element.ShowCheckBox = True
;
}
public void init()
{
COM com_Element,com_Element1,com_Elements;
anytype var_Element,var_Element1,var_Elements;
str var_s;
;
super();
exsurface1.BeginUpdate();
exsurface1.ImageSize(16);
var_s = "gBJJgBAIDAAEg4ACEKAD/hz/EMNh8TIRNGwAjEZAEXjAojJAjMLjABAAgjUYkUnlUrlktl0vmExmUzmk1m03nE5nU7nkrQCAntBoVDolFo1HoM/ADAplLptImdMYFOqd";
var_s = var_s + "SqlXq1QrVbrlGpVWsFNrNdnNjsk7pQAtNroFnt0sh8Yr9iulTuNxs1Eu8OiT/vsnsNVutXlk/oGGtVKxGLxWNtsZtN8iUYuNvy0Zvd+xNYwdwvl4p870GCqc8vOeuVtt";
var_s = var_s + "mp1knyOayWVy+WzN/ze1wOElenm+12WUz/Bv2/3UyyWrzeutux2GSyGP2dQ33C1ur3GD3M4zUNzHdlWjq/E3nGzVpjWv4HA7fRy/Tv2IrN8rPW6nZ3ve7mUlfu20Z8ac";
var_s = var_s + "vQyb+vY9jasYoDwMm+LytVBDqKG3z8O3Cb8P+mkAuY9cCQ2uL4KaxDKvkp8RNLEjqugnrwQo/UWPzFyeQw5sNLZFENrI4kOqU66pw8uzmOKvTqNqjULJvGL1JO48GtTG";
var_s = var_s + "sbLdEL3scxLlyiw8dQeoUVxdLTtyKmUjwGlslRPJsnK1HbAKbKCrsQo8uQk/CeP44iaR/ATnTNPLvyxPU+z9P9AUDQVBowiofJXQ6Oo+kKMpIkjztE4TKn4P6JowfgPn";
var_s = var_s + "wD5/nAjB8AOeAPo0eAA1IAFH07UhAIMpYAVIYFHqBUhwVjV1S1EtQAHxW65V0AZwAeuQAnwB5gAPYViEDVhwAHTQBkCjB4gOhwDmCyhH0sACAg==";
exsurface1.Images(COMVariant::createFromStr(var_s));
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
var_Element = COM::createFromObject(exsurface1.Elements()).Add("Element Check 1",COMVariant::createFromInt(-64),COMVariant::createFromInt(-64)); com_Element = var_Element;
var_Element1 = COM::createFromObject(com_Elements.Add("Child")); com_Element1 = var_Element1;
com_Element1.Parent(var_Element);
com_Element.Pictures("1/2");
com_Element.Expanded(false);
var_Element1 = com_Elements.Add("Element Check 2",COMVariant::createFromInt(0),COMVariant::createFromInt(32)); com_Element1 = var_Element1;
com_Element1.Checked(1/*exChecked*/);
com_Element1.Pictures("1,2");
exsurface1.Home();
exsurface1.EndUpdate();
}
|
|
128
|
We want to have option to start/end connectors at the middle of each side of the elements
public void init()
{
COM com_Elements,com_Links;
anytype var_Elements,var_Links;
;
super();
exsurface1.BeginUpdate();
exsurface1.ShowLinks(-1/*exShowLinks*/);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Element <sha ;;0>1");
com_Elements.Add("Element <sha ;;0>2",COMVariant::createFromInt(164),COMVariant::createFromInt(64));
com_Elements.Add("Element <sha ;;0>3",COMVariant::createFromInt(0),COMVariant::createFromInt(132));
var_Links = exsurface1.Links(); com_Links = var_Links;
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)));
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(3)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)));
exsurface1.FitToClient();
exsurface1.EndUpdate();
}
|
|
127
|
How can I determine the position the user clicks within the element's boundaries (Click event)
// Click event - Occurs when the user presses and then releases the left mouse button over the control.
void onEvent_Click()
{
COM com_e;
anytype e;
str X,Y;
;
e = COM::createFromObject(exsurface1.ElementFromPoint(-1,-1)); com_e = e;
X = -1;
Y = -1;
exsurface1.PointToPosition(X,Y);
print( e );
print( X );
print( Y );
}
public void init()
{
COM com_Elements,com_e;
anytype e,var_Elements;
str X,Y;
;
super();
exsurface1.BeginUpdate();
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Element 1");
com_Elements.Add("Element 2",COMVariant::createFromInt(128),COMVariant::createFromInt(64));
exsurface1.FitToClient();
exsurface1.EndUpdate();
}
|
|
126
|
How can I determine the position the user clicks within the element's boundaries (MouseMove event)
// MouseMove event - Occurs when the user moves the mouse.
void onEvent_MouseMove(int _Button,int _Shift,int _X,int _Y)
{
COM com_e;
anytype e;
;
e = COM::createFromObject(exsurface1.ElementFromPoint(_X,_Y)); com_e = e;
exsurface1.PointToPosition(_X,_Y);
print( e );
print( _X );
print( _Y );
}
public void init()
{
COM com_Elements,com_e;
anytype e,var_Elements;
;
super();
exsurface1.BeginUpdate();
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Element 1");
com_Elements.Add("Element 2",COMVariant::createFromInt(128),COMVariant::createFromInt(64));
exsurface1.FitToClient();
exsurface1.EndUpdate();
}
|
|
125
|
How can I convert the screen position (mouse) to surface position
// MouseMove event - Occurs when the user moves the mouse.
void onEvent_MouseMove(int _Button,int _Shift,int _X,int _Y)
{
;
print( "Point " );
print( _X );
print( _Y );
exsurface1.PointToPosition(_X,_Y);
print( "Position " );
print( _X );
print( _Y );
}
public void init()
{
COM com_Elements,com_Links;
anytype var_Elements,var_Links;
;
super();
exsurface1.BeginUpdate();
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Element <sha ;;0>1");
com_Elements.Add("Element <sha ;;0>2",COMVariant::createFromInt(164),COMVariant::createFromInt(64));
com_Elements.Add("Element <sha ;;0>3",COMVariant::createFromInt(0),COMVariant::createFromInt(132));
var_Links = exsurface1.Links(); com_Links = var_Links;
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)));
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(3)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)));
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(3)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)));
exsurface1.FitToClient();
exsurface1.AxisStyle(192);
exsurface1.AxisColor(WinApi::RGB2int(128,128,128));
exsurface1.EndUpdate();
}
|
|
124
|
Is is possible to show just the positive coordinates
public void init()
{
COM com_Elements,com_Links;
anytype var_Elements,var_Links;
;
super();
exsurface1.BeginUpdate();
exsurface1.Coord(17/*exAllowPositiveOnly | exCartesian*/);
exsurface1.AxisColor(WinApi::RGB2int(128,128,128));
exsurface1.AxisStyle(259/*exLinesThick | exLinesDot4*/);
exsurface1.ShowLinks(-1/*exShowLinks*/);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Element <sha ;;0>1");
com_Elements.Add("Element <sha ;;0>2",COMVariant::createFromInt(164),COMVariant::createFromInt(64));
com_Elements.Add("Element <sha ;;0>3",COMVariant::createFromInt(0),COMVariant::createFromInt(132));
var_Links = exsurface1.Links(); com_Links = var_Links;
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)));
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(3)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)));
exsurface1.FitToClient();
exsurface1.EndUpdate();
}
|
|
123
|
Cartesian coordinates (positive coordinates are shown top-right to the origin)
public void init()
{
COM com_Elements,com_Links;
anytype var_Elements,var_Links;
;
super();
exsurface1.BeginUpdate();
exsurface1.Coord(1/*exCartesian*/);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Element <sha ;;0>1");
com_Elements.Add("Element <sha ;;0>2",COMVariant::createFromInt(164),COMVariant::createFromInt(64));
com_Elements.Add("Element <sha ;;0>3",COMVariant::createFromInt(0),COMVariant::createFromInt(132));
var_Links = exsurface1.Links(); com_Links = var_Links;
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)));
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(3)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)));
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(3)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)));
exsurface1.FitToClient();
exsurface1.EndUpdate();
}
|
|
122
|
Default coordinates (positive coordinates are shown bottom-right to the origin)
public void init()
{
COM com_Elements,com_Links;
anytype var_Elements,var_Links;
;
super();
exsurface1.BeginUpdate();
exsurface1.Coord(0/*exDefCoord*/);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Element <sha ;;0>1");
com_Elements.Add("Element <sha ;;0>2",COMVariant::createFromInt(164),COMVariant::createFromInt(64));
com_Elements.Add("Element <sha ;;0>3",COMVariant::createFromInt(0),COMVariant::createFromInt(132));
var_Links = exsurface1.Links(); com_Links = var_Links;
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)));
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(3)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)));
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(3)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)));
exsurface1.FitToClient();
exsurface1.EndUpdate();
}
|
|
121
|
Is it possible to customize the path of the links orthogonally similar with Microsoft Visio tool
public void init()
{
COM com_Elements,com_Links;
anytype var_Elements,var_Links;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowLinkControlPoint(31/*exOrthoArrange | exMiddleControlPoint | exControlPoint | exEndControlPoint | exStartControlPoint*/);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Element <sha ;;0>1");
com_Elements.Add("Element <sha ;;0>2",COMVariant::createFromInt(164),COMVariant::createFromInt(64));
com_Elements.Add("Element <sha ;;0>3",COMVariant::createFromInt(0),COMVariant::createFromInt(132));
var_Links = exsurface1.Links(); com_Links = var_Links;
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)));
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(3)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)));
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(3)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)));
exsurface1.Zoom(200);
exsurface1.FitToClient();
exsurface1.EndUpdate();
}
|
|
120
|
Does your control supports OLE Drag and Drop
// OLEDragDrop event is not supported. Use the DragEnter,DragLeave,DragOver, DragDrop ... events.
// OLEStartDrag event is not supported. Use the DragEnter,DragLeave,DragOver, DragDrop ... events.
public void init()
{
COM com_Element;
anytype var_Element;
;
super();
exsurface1.OLEDropMode(1/*exOLEDropManual*/);
var_Element = COM::createFromObject(exsurface1.Elements()).Add("Click the Element wait for .5 second until + cursor is shown, to start <b>OLE Drag and Drop</b>"); com_Element = var_Element;
com_Element.CaptionSingleLine(false);
com_Element.AutoSize(false);
com_Element.Width(256);
com_Element.Height(56);
}
|
|
119
|
Is it possible to disable customizing the path of a specified link
public void init()
{
COM com_Elements,com_Link,com_Links;
anytype var_Elements,var_Link,var_Links;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowLinkControlPoint(-1/*0xffffffff | exAllowChangeTo | exAllowChangeFrom | exOrthoArrange | exMiddleControlPoint | exControlPoint | exEndControlPoint | exStartControlPoint*/);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Element <sha ;;0>A");
com_Elements.Add("Element <sha ;;0>B",COMVariant::createFromInt(164),COMVariant::createFromInt(64));
com_Elements.Add("Element <sha ;;0>B",COMVariant::createFromInt(0),COMVariant::createFromInt(132));
var_Links = exsurface1.Links(); com_Links = var_Links;
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2))).CustomPath("0.5,0.25,0.5,.75");
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(3)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2))).CustomPath("0.5,0.25,0.5,.75");
var_Link = com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(3)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1))); com_Link = var_Link;
com_Link.ShowLinkType(3/*exLinkStraight | exLinkDirect*/);
com_Link.StartPos(0/*LeftAlignment*/);
com_Link.Color(WinApi::RGB2int(128,128,128));
com_Link.AllowControlPoint(0/*exNoControlPoint*/);
exsurface1.Zoom(200);
exsurface1.FitToClient();
exsurface1.EndUpdate();
}
|
|
118
|
How do I let user customizes the link's path
public void init()
{
COM com_Elements,com_Link,com_Links;
anytype var_Elements,var_Link,var_Links;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowLinkControlPoint(-1/*0xffffffff | exAllowChangeTo | exAllowChangeFrom | exOrthoArrange | exMiddleControlPoint | exControlPoint | exEndControlPoint | exStartControlPoint*/);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Element <sha ;;0>A");
com_Elements.Add("Element <sha ;;0>B",COMVariant::createFromInt(164),COMVariant::createFromInt(64));
com_Elements.Add("Element <sha ;;0>B",COMVariant::createFromInt(0),COMVariant::createFromInt(132));
var_Links = exsurface1.Links(); com_Links = var_Links;
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2))).CustomPath("0.5,0.25,0.5,.75");
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(3)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2))).CustomPath("0.5,0.25,0.5,.75");
var_Link = com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(3)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1))); com_Link = var_Link;
com_Link.ShowLinkType(3/*exLinkStraight | exLinkDirect*/);
com_Link.StartPos(0/*LeftAlignment*/);
exsurface1.Zoom(200);
exsurface1.FitToClient();
exsurface1.EndUpdate();
}
|
|
117
|
How can I generate a picture/image/graph from my diagram
public void init()
{
COM com_Element,com_Elements,com_Links;
COMVariant var_CopyTo;
anytype var_Element,var_Elements,var_Links;
;
super();
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
var_Element = COM::createFromObject(com_Elements.Add("Element A")); com_Element = var_Element;
com_Element.ID("A");
var_Element = COM::createFromObject(com_Elements.Add("Element B")); com_Element = var_Element;
com_Element.ID("B");
var_Element = COM::createFromObject(com_Elements.Add("Element C")); com_Element = var_Element;
com_Element.ID("C");
var_Element = COM::createFromObject(com_Elements.Add("Element D")); com_Element = var_Element;
com_Element.ID("D");
var_Element = COM::createFromObject(com_Elements.Add("Element E")); com_Element = var_Element;
com_Element.ID("E");
var_Element = COM::createFromObject(com_Elements.Add("Element E")); com_Element = var_Element;
com_Element.ID("F");
var_Links = exsurface1.Links(); com_Links = var_Links;
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item("A"),COM::createFromObject(exsurface1.Elements()).Item("B"));
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item("A"),COM::createFromObject(exsurface1.Elements()).Item("C"));
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item("B"),COM::createFromObject(exsurface1.Elements()).Item("D"));
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item("B"),COM::createFromObject(exsurface1.Elements()).Item("C"));
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item("A"),COM::createFromObject(exsurface1.Elements()).Item("E"));
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item("A"),COM::createFromObject(exsurface1.Elements()).Item("F"));
exsurface1.DefArrange(4/*exDefArrangeCompact*/,COMVariant::createFromBoolean(false));
exsurface1.Arrange();
var_CopyTo = exsurface1.CopyTo("c:/temp/xtest.jpg");
print( "!!!check the file c:/temp/xtest.jpg!!!" );
}
|
|
116
|
How can I generate a picture/image/graph from my diagram
public void init()
{
COM com_Element,com_Elements,com_Links,com_Print;
anytype var_Element,var_Elements,var_Links,var_Print;
;
super();
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
var_Element = COM::createFromObject(com_Elements.Add("Element A")); com_Element = var_Element;
com_Element.ID("A");
var_Element = COM::createFromObject(com_Elements.Add("Element B")); com_Element = var_Element;
com_Element.ID("B");
var_Element = COM::createFromObject(com_Elements.Add("Element C")); com_Element = var_Element;
com_Element.ID("C");
var_Element = COM::createFromObject(com_Elements.Add("Element D")); com_Element = var_Element;
com_Element.ID("D");
var_Element = COM::createFromObject(com_Elements.Add("Element E")); com_Element = var_Element;
com_Element.ID("E");
var_Element = COM::createFromObject(com_Elements.Add("Element E")); com_Element = var_Element;
com_Element.ID("F");
var_Links = exsurface1.Links(); com_Links = var_Links;
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item("A"),COM::createFromObject(exsurface1.Elements()).Item("B"));
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item("A"),COM::createFromObject(exsurface1.Elements()).Item("C"));
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item("B"),COM::createFromObject(exsurface1.Elements()).Item("D"));
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item("B"),COM::createFromObject(exsurface1.Elements()).Item("C"));
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item("A"),COM::createFromObject(exsurface1.Elements()).Item("E"));
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item("A"),COM::createFromObject(exsurface1.Elements()).Item("F"));
exsurface1.DefArrange(4/*exDefArrangeCompact*/,COMVariant::createFromBoolean(false));
exsurface1.Arrange();
// Add 'exprint.dll(ExPrint.dll)' reference to your project.
// Add 'ExPrint 1.0 Control Library(ExPrint.dll)' reference to your project.
var_Print = COM::createFromObject(new EXPRINTLib.exprint()); com_Print = var_Print;
com_Print.PrintExt(exsurface1);
com_Print.CopyTo("c:/temp/xtest.jpg");
print( "!!!check the file c:/temp/xtest.jpg!!!" );
}
|
|
115
|
How can I print the component
public void init()
{
COM com_Element,com_Element1,com_Elements,com_Link,com_Link1,com_Link2,com_Links,com_Print;
anytype var_Element,var_Element1,var_Elements,var_Link,var_Link1,var_Link2,var_Links,var_Print;
;
super();
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Element <sha ;;0>A");
com_Elements.Add("Element <sha ;;0>B",COMVariant::createFromInt(0),COMVariant::createFromInt(76));
var_Element = com_Elements.Add("Element <sha ;;0>C",COMVariant::createFromInt(-76),COMVariant::createFromInt(32)); com_Element = var_Element;
com_Element.AutoSize(false);
com_Element.Height(32);
var_Element1 = com_Elements.Add("Element <sha ;;0>D",COMVariant::createFromInt(76),COMVariant::createFromInt(32)); com_Element1 = var_Element1;
com_Element1.AutoSize(false);
com_Element1.Height(32);
var_Links = exsurface1.Links(); com_Links = var_Links;
var_Link = com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2))); com_Link = var_Link;
com_Link.StartPos(1/*CenterAlignment*/);
com_Link.EndPos(1/*CenterAlignment*/);
var_Link1 = com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1))); com_Link1 = var_Link1;
com_Link1.StartPos(1/*CenterAlignment*/);
com_Link1.EndPos(1/*CenterAlignment*/);
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(3)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(4)));
var_Link2 = com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(4)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(3))); com_Link2 = var_Link2;
com_Link2.StartPos(0/*LeftAlignment*/);
com_Link2.EndPos(2/*RightAlignment*/);
// Add 'exprint.dll(ExPrint.dll)' reference to your project.
// Add 'ExPrint 1.0 Control Library(ExPrint.dll)' reference to your project.
var_Print = COM::createFromObject(new EXPRINTLib.exprint()); com_Print = var_Print;
com_Print.PrintExt(exsurface1);
com_Print.Preview();
}
|
|
114
|
How can I show direct-links
public void init()
{
COM com_Element,com_Elements,com_Links;
anytype var_Element,var_Elements,var_Links;
;
super();
exsurface1.ShowLinksType(1/*exLinkDirect*/);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
var_Element = COM::createFromObject(com_Elements.Add("Element A")); com_Element = var_Element;
com_Element.ID("A");
var_Element = COM::createFromObject(com_Elements.Add("Element B",COMVariant::createFromInt(128),COMVariant::createFromInt(64))); com_Element = var_Element;
com_Element.ID("B");
var_Element = COM::createFromObject(com_Elements.Add("Element C",COMVariant::createFromInt(128),COMVariant::createFromInt(-64))); com_Element = var_Element;
com_Element.ID("C");
var_Links = exsurface1.Links(); com_Links = var_Links;
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item("A"),COM::createFromObject(exsurface1.Elements()).Item("B"));
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item("A"),COM::createFromObject(exsurface1.Elements()).Item("C"));
}
|
|
113
|
How can I show straight-links
public void init()
{
COM com_Element,com_Elements,com_Links;
anytype var_Element,var_Elements,var_Links;
;
super();
exsurface1.ShowLinksType(2/*exLinkStraight*/);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
var_Element = COM::createFromObject(com_Elements.Add("Element A")); com_Element = var_Element;
com_Element.ID("A");
var_Element = COM::createFromObject(com_Elements.Add("Element B",COMVariant::createFromInt(128),COMVariant::createFromInt(64))); com_Element = var_Element;
com_Element.ID("B");
var_Element = COM::createFromObject(com_Elements.Add("Element C",COMVariant::createFromInt(128),COMVariant::createFromInt(-64))); com_Element = var_Element;
com_Element.ID("C");
var_Links = exsurface1.Links(); com_Links = var_Links;
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item("A"),COM::createFromObject(exsurface1.Elements()).Item("B"));
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item("A"),COM::createFromObject(exsurface1.Elements()).Item("C"));
}
|
|
112
|
How can I show round-links
public void init()
{
COM com_Element,com_Elements,com_Links;
anytype var_Element,var_Elements,var_Links;
;
super();
exsurface1.ShowLinksType(-1/*exLinkRound*/);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
var_Element = COM::createFromObject(com_Elements.Add("Element A")); com_Element = var_Element;
com_Element.ID("A");
var_Element = COM::createFromObject(com_Elements.Add("Element B",COMVariant::createFromInt(128),COMVariant::createFromInt(64))); com_Element = var_Element;
com_Element.ID("B");
var_Element = COM::createFromObject(com_Elements.Add("Element C",COMVariant::createFromInt(128),COMVariant::createFromInt(-64))); com_Element = var_Element;
com_Element.ID("C");
var_Links = exsurface1.Links(); com_Links = var_Links;
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item("A"),COM::createFromObject(exsurface1.Elements()).Item("B"));
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item("A"),COM::createFromObject(exsurface1.Elements()).Item("C"));
}
|
|
111
|
I've tried to insert a "<br>" in the Caption property text and it just ignores it
public void init()
{
COM com_Element,com_Elements;
anytype var_Element,var_Elements;
;
super();
exsurface1.BeginUpdate();
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
var_Element = com_Elements.Add("caption"); com_Element = var_Element;
com_Element.CaptionSingleLine(false);
com_Element.Caption("first caption<br>second caption<br>third caption");
exsurface1.EndUpdate();
}
|
|
110
|
How do I align the extra-caption
public void init()
{
COM com_Element,com_Elements;
anytype var_Element,var_Elements;
;
super();
exsurface1.BeginUpdate();
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
var_Element = com_Elements.Add("caption"); com_Element = var_Element;
com_Element.AutoSize(false);
com_Element.Width(128);
com_Element.Height(64);
com_Element.ExtraCaption("extra-caption");
com_Element.ExtraCaptionAlign(34/*exBottomRight*/);
exsurface1.EndUpdate();
}
|
|
109
|
How can I add an extra caption
public void init()
{
COM com_Element,com_Elements;
anytype var_Element,var_Elements;
;
super();
exsurface1.BeginUpdate();
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
var_Element = COM::createFromObject(com_Elements.Add("caption")); com_Element = var_Element;
com_Element.ExtraCaption("extra-caption");
exsurface1.EndUpdate();
}
|
|
108
|
I am using the reserve-neighbors feature, the question is how to shift left/right the neighbors instead of up/down
public void init()
{
COM com_Elements;
anytype var_Elements;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowMoveNeighbors(2/*exMoveNeighborsHorizontally*/);
exsurface1.DefArrange(0/*exDefArrangeDir*/,COMVariant::createFromInt(1));
exsurface1.AllowInsertObject(false);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Element <sha ;;0>A");
com_Elements.Add("Element <sha ;;0>B ( move it )",COMVariant::createFromInt(16),COMVariant::createFromInt(32));
com_Elements.Add("Element <sha ;;0>C",COMVariant::createFromInt(128),COMVariant::createFromInt(0));
exsurface1.EndUpdate();
}
|
|
107
|
I am using the reserve-neighbors feature, the question is if possible to specify the distance between neighbors
public void init()
{
COM com_Elements;
anytype var_Elements;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowMoveNeighbors(1/*exMoveNeighborsVertically*/);
exsurface1.DefArrange(1/*exDefArrangeDX*/,COMVariant::createFromInt(0));
exsurface1.DefArrange(2/*exDefArrangeDY*/,COMVariant::createFromInt(0));
exsurface1.AllowInsertObject(false);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Element <sha ;;0>A");
com_Elements.Add("Element <sha ;;0>B ( move it )",COMVariant::createFromInt(0),COMVariant::createFromInt(32));
com_Elements.Add("Element <sha ;;0>C",COMVariant::createFromInt(0),COMVariant::createFromInt(64));
exsurface1.EndUpdate();
}
|
|
106
|
How do I enable the reserve-neighbors feature
public void init()
{
COM com_Elements;
anytype var_Elements;
;
super();
exsurface1.BeginUpdate();
exsurface1.AllowMoveNeighbors(1/*exMoveNeighborsVertically*/);
exsurface1.AllowInsertObject(false);
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Element <sha ;;0>A");
com_Elements.Add("Element <sha ;;0>B ( move it )",COMVariant::createFromInt(0),COMVariant::createFromInt(32));
com_Elements.Add("Element <sha ;;0>C",COMVariant::createFromInt(0),COMVariant::createFromInt(64));
exsurface1.EndUpdate();
}
|
|
105
|
I've noticed that recently, the elements get compacted once the Arrange method is performed. How can I prevent that
public void init()
{
COM com_Element,com_Elements,com_Links;
anytype var_Element,var_Elements,var_Links;
;
super();
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
var_Element = COM::createFromObject(com_Elements.Add("Element A")); com_Element = var_Element;
com_Element.ID("A");
var_Element = COM::createFromObject(com_Elements.Add("Element B")); com_Element = var_Element;
com_Element.ID("B");
var_Element = COM::createFromObject(com_Elements.Add("Element C")); com_Element = var_Element;
com_Element.ID("C");
var_Element = COM::createFromObject(com_Elements.Add("Element D")); com_Element = var_Element;
com_Element.ID("D");
var_Element = COM::createFromObject(com_Elements.Add("Element E")); com_Element = var_Element;
com_Element.ID("E");
var_Element = COM::createFromObject(com_Elements.Add("Element E")); com_Element = var_Element;
com_Element.ID("F");
var_Links = exsurface1.Links(); com_Links = var_Links;
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item("A"),COM::createFromObject(exsurface1.Elements()).Item("B"));
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item("A"),COM::createFromObject(exsurface1.Elements()).Item("C"));
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item("B"),COM::createFromObject(exsurface1.Elements()).Item("D"));
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item("B"),COM::createFromObject(exsurface1.Elements()).Item("C"));
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item("A"),COM::createFromObject(exsurface1.Elements()).Item("E"));
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item("A"),COM::createFromObject(exsurface1.Elements()).Item("F"));
exsurface1.DefArrange(4/*exDefArrangeCompact*/,COMVariant::createFromBoolean(false));
exsurface1.Arrange();
}
|
|
104
|
Is it possible to add a link to show from bottom/down to top/up, rather that right to left (method-2)
// AddLink event - A new link has been added to the links collection.
void onEvent_AddLink(COM _Link)
{
;
}
public void init()
{
COM com_Elements,com_Links;
anytype var_Elements,var_Links;
;
super();
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Element <sha ;;0>A");
com_Elements.Add("Element <sha ;;0>B",COMVariant::createFromInt(48),COMVariant::createFromInt(48));
var_Links = exsurface1.Links(); com_Links = var_Links;
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)));
}
|
|
103
|
Is it possible to add a link to show from bottom/down to top/up, rather that right to left (method-1)
public void init()
{
COM com_Elements,com_Link,com_Links;
anytype var_Elements,var_Link,var_Links;
;
super();
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Element <sha ;;0>A");
com_Elements.Add("Element <sha ;;0>B",COMVariant::createFromInt(48),COMVariant::createFromInt(48));
var_Links = exsurface1.Links(); com_Links = var_Links;
var_Link = com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2))); com_Link = var_Link;
com_Link.StartPos(4/*DownAlignment*/);
com_Link.EndPos(3/*UpAlignment*/);
}
|
|
102
|
How do I enable the cross link support ( mixed )
public void init()
{
COM com_Element,com_Element1,com_Elements,com_Link,com_Link1,com_Link2,com_Links;
anytype var_Element,var_Element1,var_Elements,var_Link,var_Link1,var_Link2,var_Links;
;
super();
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Element <sha ;;0>A");
com_Elements.Add("Element <sha ;;0>B",COMVariant::createFromInt(0),COMVariant::createFromInt(76));
var_Element = com_Elements.Add("Element <sha ;;0>C",COMVariant::createFromInt(-76),COMVariant::createFromInt(32)); com_Element = var_Element;
com_Element.AutoSize(false);
com_Element.Height(32);
var_Element1 = com_Elements.Add("Element <sha ;;0>D",COMVariant::createFromInt(76),COMVariant::createFromInt(32)); com_Element1 = var_Element1;
com_Element1.AutoSize(false);
com_Element1.Height(32);
var_Links = exsurface1.Links(); com_Links = var_Links;
var_Link = com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2))); com_Link = var_Link;
com_Link.StartPos(1/*CenterAlignment*/);
com_Link.EndPos(1/*CenterAlignment*/);
var_Link1 = com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1))); com_Link1 = var_Link1;
com_Link1.StartPos(1/*CenterAlignment*/);
com_Link1.EndPos(1/*CenterAlignment*/);
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(3)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(4)));
var_Link2 = com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(4)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(3))); com_Link2 = var_Link2;
com_Link2.StartPos(0/*LeftAlignment*/);
com_Link2.EndPos(2/*RightAlignment*/);
exsurface1.ShowLinks(97/*exShowCrossLinksMixt | exShowExtendedLinks*/);
}
|
|
101
|
How do I enable the cross link support ( triangular )
public void init()
{
COM com_Element,com_Element1,com_Elements,com_Link,com_Link1,com_Link2,com_Links;
anytype var_Element,var_Element1,var_Elements,var_Link,var_Link1,var_Link2,var_Links;
;
super();
var_Elements = exsurface1.Elements(); com_Elements = var_Elements;
com_Elements.Add("Element <sha ;;0>A");
com_Elements.Add("Element <sha ;;0>B",COMVariant::createFromInt(0),COMVariant::createFromInt(76));
var_Element = com_Elements.Add("Element <sha ;;0>C",COMVariant::createFromInt(-76),COMVariant::createFromInt(32)); com_Element = var_Element;
com_Element.AutoSize(false);
com_Element.Height(32);
var_Element1 = com_Elements.Add("Element <sha ;;0>D",COMVariant::createFromInt(76),COMVariant::createFromInt(32)); com_Element1 = var_Element1;
com_Element1.AutoSize(false);
com_Element1.Height(32);
var_Links = exsurface1.Links(); com_Links = var_Links;
var_Link = com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2))); com_Link = var_Link;
com_Link.StartPos(1/*CenterAlignment*/);
com_Link.EndPos(1/*CenterAlignment*/);
var_Link1 = com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(2)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(1))); com_Link1 = var_Link1;
com_Link1.StartPos(1/*CenterAlignment*/);
com_Link1.EndPos(1/*CenterAlignment*/);
com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(3)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(4)));
var_Link2 = com_Links.Add(COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(4)),COM::createFromObject(exsurface1.Elements()).Item(COMVariant::createFromInt(3))); com_Link2 = var_Link2;
com_Link2.StartPos(0/*LeftAlignment*/);
com_Link2.EndPos(2/*RightAlignment*/);
exsurface1.ShowLinks(65/*exShowCrossLinksTriangle | exShowExtendedLinks*/);
}
|